This is a genuine Weber part used with the Genesis, Summit, and Spirit grills. Each pack includes two hinge bolts and two nuts; each pack has the hardware for one door. The top pin of the screws fit into pre-drilled holes in the frame of the front doors. They are held onto the doors with the provided bolts.
Troubleshooting
This part works with the following brands:
Weber
This part works with the following products:
Grill
Built-In Cooking
Videos For installing this part.
?
★
Customer Part Reviews
?
4.8
Average Rating (out of 5):
★★★★★
★★★★★
(13 Reviews)
Click to filter by ratings:
5 stars
11
4 stars
1
3 stars
1
2 stars
0
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exactly what I needed!
This door pin hinge fit perfectly and was very easy to install. It was a bit pricey but is a rather unique item from Weber. Grill door is back on and the griller is happy!
Guest - April 26, 2019
Verified Purchase
★★★★★
★★★★★
Perfect Replacement
The Weber hinge was exactly what I needed. ReplacementParts.com helped guide me to the exact part I needed. They also had an excellent video to show me how to install the part. I would highly recommend them and will always use them in the future.
Guest - June 10, 2019
Verified Purchase
★★★★★
★★★★★
Fast service
I received the adjustable door hinge and it was easy to install. eReplacementsParts shipped my order immediately & were very efficient.
Guest - July 2, 2019
Verified Purchase
★★★★★
★★★★★
Quick and easy to use
hard to find parts in stock!
Guest - July 10, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair quck installation
Super easy and perfect fit...
Jeff - July 16, 2019
Verified Purchase
★★★★★
★★★★★
Easy fix
Ordered what I needed. Arrived quickly on time. Grill door was a easy fix. Good as new again.
Guest - September 20, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
Exactly as described
Paul - October 1, 2019
Verified Purchase
★★★★★
★★★★★
Perfect
Just the parts I needed to make my used Weber grill look as good as new. Fast delivery too. Thanks
Guest - July 7, 2020
Verified Purchase
★★★★★
★★★★★
got it worked graet
order weber grill door pin fit great as always never disappointed
thanks
Guest - June 8, 2021
Verified Purchase
★★★★★
★★★★★
Semi easy repair. Weber makes it difficult to install replacement door hinge.
Part worked great, installation was difficult.
Guest - July 16, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Check to verify the model of your grill before ordering your replacement hinge pin. There is a very lengthy list of compatible models for this part so it is quite easy to find exactly what you need. The pins come two to a pack. Place the pin through the slotted hole on the bottom arm of the hinge with the pin facing upward and the threa
... Read moreds (and eventually the nut) below the hole. Tighten the nut by using the appropriate size wrench making sure to align the pin in the slot where appropriate for correct alignment of the door on the grill. Place the hole in the bottom of the door onto the newly installed bottom hinge pin. The top door pin is spring loaded and must then be drawn back into the top of the door by using something small such as a small slot screwdriver tip to push it down. Align the recessed pin with the top door hinge hole and let it snap up into place. That should do it! Pretty easy, huh?
Read less
Did you find this story helpful?
Thank you for voting!
The adjustable door hinge was broken on the bottom.
I took the broken piece off and installed the new one. Less than 10 minutes!!
The part came with \"picture and written instructions\", which was awesome!!
Did you find this story helpful?
Thank you for voting!
Bottom and both side panels rusted badly causing one door to fall off, the other about to and large holes in the bottom of the cabinet. The back panel was also rusted but I was able to sand and paint
1. Remove the door that had not fallen off
2. Disconnect natural gas supply.
3. Remove the fire box control panel, internals and drip trays to lighten the assembly.
4. Attempted to separate the lid from the firebox by removing the hinge pins. However, the pins were seized to one side of the hinge and would not slide out
... Read moreeven with WD40 and gentle persuasion. I left the lid attached as I feared breaking the hinge.
5. Removed the lid/firebox assembly. (I should have had a helper. It is not too heavy but is awkward.)
6. Remove the back from the grill cart - clean, remove surface rust and paint.
7. Assemble new grill cart using new sides, bottom and old back.
8. Reassemble the rest of the grill in reverse order of disassembly.
1. Pick broken door off of the deck
2. Inspect and ascertain what caused the issue
3. Order Parts from ereplacementparts, only ones that had the part!
4. Receive parts
5. Figure out where parts were to be installed
6. Install parts with a crescent wrench
7. Install door
8. Adjust door pin
1. Removed tank and loose parts such as grids, flavorizer bars, drip pan, etc.
2. Tipped grill backwards to lay it on its back, to gain better access to bottom where the adjustable door hinge would be placed.
3. Installed hinge into slotted flange that holds it.
4. Installed door while using flat blade screw driver to
... Read morehold spring loaded, top hinge down to retract top hinge into body of door.
5. Fit bottom of door onto newly installed hinge.
6. Removed screw driver after checking for proper alignment of top hinge, insuring that it popped into round hole in grill body. This is under the panel where the burner dials are located.
7. Checked alignment of door and slid new hinge slightly in flange to make an even gap between the 2 doors.
8. Snugly tightened the new adjustable hinge.
9. Returned grill to upright position.
10. Reinstalled tank and other loose parts.
11. Ignited all 3 burners to verify proper functioning of grill. Job done!
Note: It was difficult to tell whether the nut and hinge body (where wrench is placed) are metric or SAE. I hate using adjustable wrenches, but thatGÇÖs what I used to finish the tightening. Maybe instructions included that info, but I did not bother to read them!
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 70332 Weber Adjustable Door Hinge")
_WW_1.gif "Part Location Diagram of 70332 Weber Adjustable Door Hinge")
