Part Location Diagram of 70057 Weber Manifold Assembly
See part 27 in the diagram
( Grid squares measure 1x1 inch )

Manifold Assembly 70057

Manufactured by:
Weber
ERP Number:
ERP10511467
Part Number:
70057
Original Equipment Manufacturer ?
  Works with your model  6670001!
$167.11
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(2 rated repairs) ?
  Works with your model   6670001!

Product Description

?

The manifold assembly goes next to the heat shield. This part is available as an individual replacement. This part is an OEM sourced directly from the manufacturer for use in Weber grills. A screwdriver and a wrench set might be necessary during the installation of this item. Over time this part may break and will need to be replaced.

Troubleshooting

This part works with the following brands:
  • Weber
This part works with the following products:
  • Grill

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Left control valve stripped after it became stuck in open position.

Jay from Clinton, Ohio

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Parts Used:
70057
Note: this kit is for a natural gas Webber grill not propane. Removed knobs and front cover. Then loosened burner tube screws. Then replaced manifold assembly. This part looked like an upgrade from original design. The supplied instructions were very clear and detailed and give a list of required wrench sizes to disconnect gas line from m anifold. I used some pipe dope on the fitting before reattaching the manifold to the grill\'s gas line The new part worked great. Took less than an hour to replace including cleaning the grill and burner areas. I highly recommend this kit and have been using the grill for over a month with no issues. J. M.
Did you find this story helpful?
Thank you for voting!

Grill gas control valves broke when wind knocked grill over

Michael from Lisle, Illinois

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
Parts Used:
70057
1. Shut off gas
2. Removed trim piece
3. Removed each valve one at a time
4. Reconnected valves then trim piece
5. Turned on gas and we were grilling once again
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10511467
Manufacturer Part Number: 70057
Brand Model Number Description
Weber 6631001 Grill - Genesis 330 NG Grill
Weber 6631301 Grill - Genesis 330 NG Grill
Weber 6631701 Grill - Genesis Cep-330 Ng Blk (2013) (Usa/Canada)6631701
Weber 6670001 Grill - Genesis S-330, Stainless, NG Gas Grill
Weber 86631001 Grill - Genesis E-330 Ng Blk (Usa/Canada)
Weber 86631301 Grill - Genesis EP-330 Grill - Black
Weber 86631701 Grill - Genesis Cep-330 Ng Blk (Usa/Canada)
Weber 86670001 Grill - Genesis S-330 Grill - SS
Weber E330NG-2011 Grill - Gas Grill
Weber S330 Grill - Gas Grill