Part Location Diagram of 69871 Weber Electronic Ignition Switch/but
See part A-16 in the diagram
( Grid squares measure 1x1 inch )

Electronic Ignition Switch/but 69871

Manufactured by:
Weber
ERP Number:
ERP10511435
Part Number:
69871
Original Equipment Manufacturer ?
  Works with your model  46510001!
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

Less than 15 mins 

(4 rated repairs) ?
  Works with your model   46510001!

Product Description

?

This genuine component is supplied by the original equipment manufacturer. It is specially designed for use with Weber Grills. Igniter produces the spark to ignite the burner. Over time parts may wear out or get damaged eventually requiring replacements. Includes the switch with the rubberized push button and two attached wires. Make sure to refer to the appropriate diagram of your model and the included instructions for the correct installation of the new unit.

Troubleshooting

This part works with the following brands:
  • Weber
This part works with the following products:
  • Grill
  • Built-In Cooking

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Plastic on igniter failed and no spark

Robert from Greenacres, Washington

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
69871
Repair went great. Tested it twice and it worked well.
Did you find this story helpful?
Thank you for voting!

The unit was well rotted and fell apart

Charles from Montrose , Pennsylvania

1 person found this instruction helpful.
Difficulty Level:
Very Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:
69871, 69810
Removed ignition switch and connected the new switch to the control panel. Took off the bottom panel and attached the new one.
Did you find this story helpful?
Thank you for voting!

Mouse damaged wires from ignition switch

Gerald from Wamego, Kansas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
69871
1. Removed the old switch
2. Installed new switch
Did you find this story helpful?
Thank you for voting!

Switch broke

Shawn from Waxhaw, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
69871
Switched out the old for the new one.
Did you find this story helpful?
Thank you for voting!
  • 1