1. Removed old ignitor Module by removing 2 Philips screws.
2. Unplug the 4 wires one at a time and plug into the new module as you remove.
3. Remount module with the two new screws.
4. Install the new battery.
Remove 2 Philips head screws that hold unit to grill. Then remove the four wire plugs and install on the new module in the same order they were removed. Install module with the two new Phillips head screws provided. Turn propane gas tank off , then test unit .You should here the spark. If you hear the spark, you can turn the gas on and li
... Read moreght the grill.
Removed the ignition module and wiring with the aid of a screwdriver. A new module was installed with minimum effort. The project went well and the grill is now working correctly.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10511421
Manufacturer Part Number: 69848
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
