This is a genuine Weber repair part used with charcoal grills. This is an eleven-piece repair kit that is used with the Lid Bale, a long metal piece that holds the lid open and on the back of the grill during cooking.
Troubleshooting
This part works with the following brands:
Weber
This part works with the following products:
Grill
★
Customer Part Reviews
?
4.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Product worked great! Ordering it did not.
This was the exact piece I needed, it was decently priced, it installed easily, it works wonderfully. My ONLY problem (and the reason for the star drop) was because of the ordering process. I ordered this as 1/3 of a total order. One item (the one of the three I could pick up elsewhere) was on backorder so ERP held the entire shipment. I tried and tried to find a way to drop the part on backorder off of the order so they could ship what they had on hand, but the phones rang empty, email support was no help, and the only option available to me online was to cancel the entire order.
I stuck it out and luckily the extra item became available in time, but the inability to modify an existing order was frustrating and the lack of ability to reach out to any form of customer service to address the issue left me in limbo hoping I'd eventually get my purchase.
Tim - October 9, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1) Put the roller on the wire lid holder from the parts bag
2) Put a washer on the wire lid holder in front of the roller from the parts bag.
3) Put the threaded end of the wire lid holder through the only hole it can go through assuming the rest of the lid holding hardware is installed.
4) Tighten the nut and locking wa
... Read moresher onto the threads of the wire lid holder poking through the hole on the bbq. Make sure the roller spins and that the nut and locking washer are secure. You are done
Read less
Did you find this story helpful?
Thank you for voting!
House fire melted plastic lid support rest and ash pan
Ash catcher: Positioned screwdriver to disengage the three old ash catcher ring clips from the leg couplings. Installed new ash catcher ring by lining up ring clips to leg couplings. The enclosured High-capacity ash catcher assembly replacement instructions provide excellent sketches with directional arrows and exploded views. Later styl
... Read moree design makes emptying ash pan much easier. Lid support: replace missing nut and plastic lid support on one end of the bale.
1. Removed the nut on the other side and middle support.
2. Add the rubber end supports, one per side.
3. Added the supplied washer and nut to all three supports
4. Tightened everything down.
Did you find this story helpful?
Thank you for voting!
Grill lid plastic rollers had melted from high heat and stuck to grill and support bar
1. Remove nuts from lid support rod
2. Apply some force to remove old melted rollers and try to remove as much melted roller that is stuck on BBQ.
3. Replace with new rollers
Note: I added oversize washers in the hope that it will help reduce the melting problem.
4. Use provided hardware to remount lid support bar.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 63049 Weber Hardware For Lid Support")
_WW_1.gif "Part Location Diagram of 63049 Weber Hardware For Lid Support")
