This is a manufacturer sourced replacement thermometer designed for use with Weber grills. It can be used to measure temperature inside the grill and the temperature of the food. This part is made out metal and it is sold individually. Wingnut is included. Dial reads 150 - 600 degrees.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy replacement
worked perfectly, shipping was slow (due to mail-in voting, I guess)
Anthony - November 7, 2020
Verified Purchase
★★★★★
★★★★★
Exact replacement part.
Because this is an exact replacement part, no modifications were needed and assembly was a breeze. Because the original had a tendency to get moisture inside and cause it to malfunction , I expect the life expectancy to be about the same. Three years. At least I know where to get another one.
Guest - December 29, 2020
Verified Purchase
★★★★★
★★★★★
Weber grille thermometer
The thermometer I ordered was a direct replacement part. Fast delivery.
Will purchase again from eReplacementParts
Guest - June 10, 2021
Verified Purchase
★★★★★
★★★★★
Easy to install - works great
After 7 years, my Weber grill thermometer broke. This replacement part is perfect. Fast delivery and decent price.
Guest - July 2, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair.
Works great.
Guest - July 2, 2021
Verified Purchase
★★★★★
★★★★★
All went as expected
Fit the weber grill opening and worked right.
Guest - August 26, 2021
Verified Purchase
★★★★★
★★★★★
This was an easy fix. Ordering was good. I am happy
The part was easy to install.
Guest - July 7, 2022
Verified Purchase
★★★★★
★★★★★
Good fit in the bracket and it works well.
The Thermometer arrived in great condition. Due to design changes I did had to drill a large entry hole in the Weber Hood. But that ws easily accomplished.
Guest - August 2, 2022
Verified Purchase
★★★★★
★★★★★
as promised
Works like a charm. will purchase future parts needed here. Thank you,
Guest - July 7, 2020
Verified Purchase
★★★★★
★★★★★
As described
This is the smaller thermometer Weber sells. Works just fine.
Guest - August 24, 2020
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Drilled a hole in the Grill cover
2. Inserted the thermometer through the bezel
3. Tightened the wing nut to the underside of the thermometer probe.
I researched the part numbers for the Thermometer & Bezel from a newer Weber Kettle. I then checked inventory on eReplacementParts.com, they had the OEM Weber parts in stock, I ordered and received in a couple days.
I drilled a hole in the Kettle lid for the Thermometer Probe and made a slot for the tab and that was that. Ver
... Read morey happy with the installation.
1. Unscrewed the wing nut behind the old thermometer in the grill shroud.
2. Removed the old thermometer from the bezel.
3. Inserted new thermometer in the bezel.
4. Tightened the wing nut.
5. Tested the grille--all systems go!
Did you find this story helpful?
Thank you for voting!
Grill was left on high for 10 - 15 minutes to cook off accumulated grease by apparently that pegged the thermo past 600 and it stopped working.
Remove wing nut behind thermometer. Mine was just hand tight but use a pry or pliers if necessary.
Remove thermometer and reuse its bezel, placing new thermometer inside original bezel.
insert new thermometer/bezel assembly into hole in grill lid. Align the dial so markings are level with horizon.
Place wingnut on the
... Read morethreaded portion of assembly and hand tighten. No need to overtighten.
A snug fit will allow for heat expansion and cool-down contraction.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10510719
Manufacturer Part Number: 60540
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
