This replacement burner tube set is supplied directly from original equipment manufacturer. It is commonly use on Weber grills. Burners are a key component of a gas grill because, it is where the flames would rise from. They are connected to control valves. This set includes three (3) stainless steel burner tubes, one (1) carry over tube and the hardware to secure the burners. Replacing burners is a simple task that should only require a wrench. • Make sure gas tank is disconnected • Remove screws securing the old burners • Disconnect old burners from control valves and replace them with a new burners • Secure burners using the included hardware and • Secure the carryover tube • Connect the gas tank and test the burners
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Customer Service was exceptional!
My first order was delivered promptly. Unfortunately it was the wrong size. Customer service reps helped me find the correct parts by referring me to the manufacturer (Weber), easily returned the first order and had the correct order delivered promptly. All this with friendly easy conversation.
Guest - November 10, 2022
Verified Purchase
★★★★★
★★★★★
24 year old Weber Repair!
My Platinum II Weber has been discontinued for many years and I've been finding it hard to buy parts. The folks here were able to cross-reference these burners and they fit perfect! Rebuilding a grill is a dirty job but this was worth it. Thanks
Guest - August 3, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I have a twenty year old Weber grill that has never been inside. It was in need of attention. Over the years all that I done to it was replace a crossover tube and the flavorizer bars. I thought about replacing it with either a new Weber or another cheaper grill. First, understand I love my Weber!! I decided that a cheaper grill just woul
... Read moredn\'t do. I decided that I wouldn\'t purchase a new Weber, rather rebuild the one I had.
I stripped it down, cleaned it well, power washed it, repainted the black areas with high heat and satin paint. The last step was to install all new parts, tables burners, etc. I got to keep a grill I know well and love for less than the cost of a new Weber AND less than the cost of a cheaper grill.I doubt that this is possible with many other appliances.Did I say that I love my Weber? You will too. Thank you Weber for a great product and thank you eReplacementParts for having everything I needed.
This repair took only 20 min. All instructions needed were supplied with the new parts. The one thing that did not need was the spider guards. The new replacement tubes have been re-designed to include the spider guard as part of the tubes. This grill now works good as new. It would have cost more than 3 times the parts price to replace
... Read morewith a new grill.
Followed the instructions. Disconnect lp tank . Remove hose. Remove wing nuts pull tubes out and install new ones . Tighten wing nuts install hose and connect tank . Pretty straightforward
Did you find this story helpful?
Thank you for voting!
Lower tray was rusted through. Burners were old and inefficient. Grill is 18 years old
Replace lower tray and drip pan housing. Replaced burners after taking off starter knobs, housing, and gas manifolds. replaced burners following instructions. the reverse order to finish. Even though it is a fairly simple project read entire directions before starting.
Removed control panel removed manifold pulled burners out the side. The bolts holding them would not come out so they had to be pulled out forcefully and the new one had to be tapped in under the washer. I got lucky. If it didn\'t pull out I would have been in a pinch
1-Remove cooking grates and flavorizer bars
2-Remove control knobs and panel
3-Remove manifold assembly
4-Remove burner assembly
5-Iinstall burner tubes
and igniter kit
6-Reinstall manifold and valve assembly, panel and control knobs
7-Turn on gas and check for leaks
8- Reinstall flavoriz
... Read moreer bars and cooking grates
Note: The burner kit and ignitor kit include installation instructions.
Removed old pipes. Problem was caused by the grill being connected to natural gas. Hard time figuring out how to turn off gas. New pipes installed easily.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
