Part Location Diagram of S0038596 Powermate Rubber Foot, Assy
See part 17 in the diagram
( Grid squares measure 1x1 inch )

Rubber Foot, Assy S0038596

Manufactured by:
Powermate
ERP Number:
ERP11873712
Part Number:
S0038596
Original Equipment Manufacturer ?
  Works with your model  PL0544200!
$32.58
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   PL0544200!

Product Description

?

This is an authentic rubber foot made by Powermate for the generators listed below. The foot attaches to the generators' frame, diminishing vibrations and stabilizing position while protecting surfaces beneath. This assembly includes one (1) foot, one (1) bolt, and two (2) washers. Sold individually.

Troubleshooting

This part works with the following brands:
  • Powermate
This part works with the following products:
  • Generator
Part# S0038596 replaces these:
S0038596,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Rubber foot pad torn off.

Jim from BRAZIL, Indiana

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
S0038596
1. Removed the bolt for the old foot pad
2. Installed the new foot pad and the bolt.
Did you find this story helpful?
Thank you for voting!

The rubber foot on a Coleman generator fell apart

Isaiah from Gladstone, Missouri

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
S0038596
1. Undo bolt that held the old rubber pad.
2. Install new rubber pad using socket.
3. Done
Did you find this story helpful?
Thank you for voting!

Rubber deterated

Steve from Kittrell, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
S0038596
Remove bolt from bottom side
Remove robber foot and washers
Replace ribber foot and washers one on top one on bottom of robber
Tighten bolt
Did you find this story helpful?
Thank you for voting!

The rubber feet on our generator where worn from time and age and fuel

George from Manchester, Tennessee

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
S0038596
Once we received the new rubber foot, assembly we removed the old ones and placed the new ones on the two generators we had. Great parts and very easy to get.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11873712
Manufacturer Part Number: S0038596
Brand Model Number Description
Powermate PL0542200 Generator - Generator
Powermate PL0544000 Generator - Generator
Powermate PL0544200 Generator - Generator
Powermate PL0545000 Generator - Generator
Powermate PM0504602 Generator - Generator
Powermate PM0505602 Generator - Generator
Powermate PM0505622 Generator - Generator
Powermate PM0542000 Generator - Generator
Powermate PM054200001 Generator - Generator
Powermate PM0542200 Generator - Generator
Powermate PM054220001 Generator - Generator
Powermate PM0544000 Generator - Generator
Powermate PM0544003 Generator - Generator
Powermate PM0544020 Generator - Generator
Powermate PM0544200 Generator - Generator
Powermate PM0545000 Generator - Generator