Product Description
?This part is an OEM sourced directly from the manufacturer for use in small engines and generators made by Honda. The air in joint gasket attaches to the air cleaner housing. A screwdriver and a socket set may be necessary during the installation of this part. The gasket is made out of a thin material and will need to be replaced if it breaks. This is available as an individual replacement part.
Frequently Purchased Together
?Troubleshooting
- Honda
- Engine
- Generator
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Would not start
Christopher from St. John , Virgin Islands
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
- Parts Used:
- 17218-Z07-000, 17211-Z07-000, 16100-Z0D-D03, 17274-ZT3-000, 16221-ZG0-801
2- Remove air filter housing
3- Remove carb assembly
4- Put on new carb gasket
5- Put on new carb assembly
6- Reinstall air filter housing
7- Start motor!!
8- Motor runs great
starter rope replacement
Leonard from FORT MYERS, Florida
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set
- Parts Used:
- 68325-Z07-003, 28462-Z07-004, 18382-ZC0-000, 17274-ZT3-000, 16221-ZG0-801
Carburetor repair,replace fuel filter.
Bob from YOUNGSTOWN, Florida
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
- Parts Used:
- 17274-ZT3-000, 16952-ZA8-800, 16221-ZG0-801, 16010-ZM7-D01
Carburetor gummed up and wouldn\'t start
HUGH from Ellenton, Florida
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
- Parts Used:
- 17218-Z07-000, 17211-Z07-000, 17274-ZT3-000, 16221-ZG0-801
Motor was surging up and down.
Christopher from Valencia, California
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set
- Parts Used:
- 17274-ZT3-000, 16952-ZA8-800, 16010-ZM7-D01
- < Prev
- 1
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.