Part Location Diagram of 16212-Z0D-D00 Honda Gasket, Insulator
See part C-14 in the diagram
( Grid squares measure 1x1 inch )

Gasket, Insulator 16212-Z0D-D00

Manufactured by:
Honda
ERP Number:
ERP11889802
Part Number:
16212-Z0D-D00
Original Equipment Manufacturer ?
  Works with your model  EB2000I!
$6.16
On Order
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(3 rated repairs) ?
  Works with your model   EB2000I!

Product Description

?

This is a genuine Honda replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the carburetor insulator and the cylinder. It is recommended to replace the gaskets when servicing the engine to ensure proper seals when the parts are reassembled. This item is sold as an individual replacement part.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Generator

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Would only run with choke closed.

Anthony from Annandale, Minnesota

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Took the carburetor apart, cleaned the jets and reassembled. Put in the fuel filter and the gasket. Works like it did when it was new.
Did you find this story helpful?
Thank you for voting!

Carb gummed up from bad gas

Mike from Faith, South Dakota

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
videos are your friend. Many videos with Honda EUU2000i carb overhaul. I was in a hurry and also bought a replacement carb to get the generator up and running, but have since overhauled the original carburetor and it runs fine now. You will be time and money ahead ordering the pilot jet set. If you get the original unplugged you will have a spare. Many people say the screw over the pilot jet just holds the jet in. Not true it is a throttle stop screw and has a specific setting that may change with each jet. The setting is described in the EU2000i service manual, free from many sources. Great parts and great service. My new go to small engine parts house.
Did you find this story helpful?
Thank you for voting!

Nothing really wrong, the unit was ten years old, and was a bit difficult to start

JAN from :EVERGREEN, Colorado

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Removed carburetor for cleaning, replaced spark plug.

As an aside, one of the carburetor gaskets opening was oblong, rather than circular. Unable to utilize the gasket.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11889802
Manufacturer Part Number: 16212-Z0D-D00
Brand Model Number Description
Honda EB2000I Generator - Generator
Honda EB2000IT1 Generator - Generator
Honda EB2200IT Generator - Eajt Generator, Made In Thailand
Honda EU2000I Generator - Generator, Jpn, Vin# Eaaj-1170001
Honda EU2000IK1 Generator - Generator, Jpn, Vin# Eaaj-1170001
Honda EU2000IT1 Generator - Generator
Honda EU2200IT Generator - Eamt Generator, Made In Thailand