This is an authentic Generac replacement part that is OEM sourced to ensure a high level of quality. The valve is intended to be used with portable generators. This part is part of the fuel system and is used to regulate the flow of fuel to the engine. This item is sold individually.
Troubleshooting
This part works with the following brands:
Generac
This part works with the following products:
Generator
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The petcock to turn gas on and off had been damaged and was leaking, so gas had been shut off. The air cleaner had also been bumped and would not seal well so I changed it as well. Tipped the generator on end to avoid gas leakage. Pulled 3 bolts out of air cleaner and removed the old one, while I had it apart, pulled the carb off and blew
... Read more out the jets. Replaced the carb and put new air cleaner on. Removed the gas lines from petcock and unscrewed it from tank, screwed the new one in its place and replaced the hoses. Set the generator back down and pulled the rope a couple times and off it went.
Quick and simple!
Generac, removed the cover off generator and replaced AVR. Then installed fuel valve. I stole the fuel valve the year before for my dune buggy and had to replace it. The Troy Bilt needed the oil sensor because it kept shutting off. I bypassed while waiting for the part. Installed it in less than 5 minutes. The Generac took about 10
... Read moreminutes for the repair parts. I took an additional 30 minutes to clean up the carb on the Generac. It was gummed up. Done.
Had to purchase gasoline tolerant rubber fuel line from auto parts store. Put generator on blocks to have valve higher than fuel level in tank. Removed old shut off valve. assembled new shut off valve from box, had to insert filter into valve assembly. Removed old fuel line and installed new onto carburetor and shut off valve. Insert valv
... Read moree assembly into opening on bottom of fuel tank and tighten with wrench. Test for leaks first and then test run generator. Whole job took less than 15 minutes.
I got the proper tools required ( two wrenches and pliers ) I then placed three bricks under the generator to force the gas in the tank towards the back so there would be no leakage when removing old part. I attached lower gas line to replacement part. I loosed top bolt and removed old part and put replacement part in place and tightened
... Read moreit up. It works great!!!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9874196
Manufacturer Part Number: 0H0406
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
