1. Remove air cleaner cover.
2. Close fuel cut off, and removed fuel line to carb inlet. (For access)
3. Removed fry engine cover that houses start switch and choke assy. (Be careful not to dislodge wiring)
4. Remove old choke, paying attention to orientation and connecting hole on butterfly.
5. Install new choke
... Read more wire to butterfly first, then carefully mount choke base to the front cover. (You will need to completely remove the retaining nut so you can slide the base into the front cover).
6. Tighten choke rear but with pliers while holding front with needle nose pliers.
7. Carefully reinstall frt cover to not pinch wiring harness. Make sure the fuel cut off wire is secure, and the ground wire is secured to the top left bolt.
8. Reconnect fuel line & air cleaner cover.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9873823
Manufacturer Part Number: 0D5398
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.