Part Location Diagram of 5313228791 DeLonghi Gasket
See part 55 in the diagram
( Grid squares measure 1x1 inch )

Gasket 5313228791

Manufactured by:
DeLonghi
ERP Number:
ERP17812427
Part Number:
5313228791
Original Equipment Manufacturer ?
  Works with your model  EC9155MB!
$5.95
On Order

Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   EC9155MB!

Product Description

?

This is an authentic OEM sourced component which is specially made for use with DeLonghi coffee makers. The part provides an identical replacement for a missing or a faulty O-ring that was installed on a new unit. It provides a tight seal between connected components. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality O-ring is made of durable rubber material and is sold individually. A screwdriver will be needed to perform this repair.

Troubleshooting

This part works with the following brands:
  • DeLonghi
This part works with the following products:
  • Espresso Machine
  • Coffee Maker
Part# 5313228791 replaces these:
5313217691,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Coffee express start leak water

Rafal from Glendale, New York

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1.remove panels from coffee express using screwdriver.
2.using pick or small hook remove small spring washers from tube .
3.wiggle tube out from holders remove old rubber o-rings with pick or hook
4.install new o-rings on fed tub and reinstall new tub in holders reinstall spring washers on tube
5.reinstall all pan els from coffee express .enjoy coffee .
Did you find this story helpful?
Thank you for voting!
  • 1