This is a Genuine OEM replacement part designed for Gas String Trimmers. The kit includes the fuel filter, supply fuel line, return line, and line connector. The purpose of these Fuel Lines is to to provide fuel into the carburetor. The filter is situated inside the fuel tank, with the fuel line extending through an existing hole in the fuel tank. It is then connected to the primer bulb which will purge the air out of the carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. Over time the fuel lines will deteriorate and become brittle so they would need to be replaced.
1. Reviewed operating manual on trouble shooting.
2. Watched your video on the replacement of the fuel lines for this make/model.
3. Made an install diagram of fuel lines from and to fuel tank and carburetor.
4. Placed all parts and screws removed in a container.
5. Inspected gaskets for damage.
6. Installed
... Read morethe two fuel lines and trimmed their length using the old fuel lines as a guide.
7. Replaced the carburetor mount and cover. Checked that all screws were tight.
8. Confirmed all parts and screws in the container were replaced.
9. Tested spark plug for spark and correct gap.
10. Added fresh gas to fuel tank. Fuel tank drained before repair.
11. Started trimmer and adjusted idle screw.
While cost of parts and were expensive, the online video was very helpful.
Removed cover, pulled new tubing through tank, pulled through tank wall with pliers. The string was used to get tubing to hole in tank , than pulled rest of the way with the pliers...
1. Removed the old lines.
2. Cut the stone filter from the new replacement line for the inside tank.
3. Fed the new line for the tank through the hole in the bottom of the tank.
4. Pulled the new tank line through the filler opening and the attached the new stone filter.
5. Cut to length and attached the remaini
... Read moreng fuel lines.
6. Installed the new bulb and attached the lines.
Read less
Did you find this story helpful?
Thank you for voting!
Trimmer idled fine but died when throttle applied.
1. I first disassembled the air cleaner from the machine and gave it a cleaning.
2. Removed the carb and throttle connection.
3. Removed fuel lines and fuel tank.
4. Installed new fuel lines. Couldn\'t thread the new line thru hole in the tank since it was on opposite end of tank fill. So, I cut the line in the tank with
... Read more the fuel filter and used a splice in the tank. Worked well.
5. Went ahead and bought a new carb for $12.99 and installed.
Hooked new lines to carb and new primer bulb.
6. Installed new air filter and put it all back together.
7. Works great, after slight adjustment of the idle screw.
8. No more ethanol fuel for me.
1.- Remove the plastic from the machine
2.- Remove the carburetor
3.- Remove the fuel tank
4.- Remove the damaged lines.
5.- Install the new ones and assemble in the same order
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19282320
Manufacturer Part Number: 753-04233
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 753-04233 Husky FUEL LINE ASM")
_WW_2.gif "Part Location Diagram of 753-04233 Husky FUEL LINE ASM")
