Part Location Diagram of 31014904000 Oster Agitator Assembly
See part E in the diagram
( Grid squares measure 1x1 inch )

Agitator Assembly 31014904000

Manufactured by:
Oster
ERP Number:
ERP17016441
Part Number:
31014904000
Original Equipment Manufacturer ?
  Works with your model  6675!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(113 rated repairs) ?
  Works with your model   6675!

Product Description

?

The 031014-104-000 Agitator is sold individually. The Agitator Assembly (Or Blade Assembly) is the part of the blender that chops, blends or mixes the product that is put into the blender jar. After time the blades will become dull or break or the spline that is attached to the shaft may wear out. When replacing the Agitator it is advisable to inspect the Sealing Ring, which is in between the agitator and the jar for cracks and if it has been compressed too much, which will cause it to leak from the bottom.

Troubleshooting

Part# 31014904000 replaces these:
31014904000,
★

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(42 Reviews)
Click to filter by ratings:
  • 5 stars
    39
  • 4 stars
    2
  • 3 stars
    1
  • 2 stars
    0
  • 1 star
    0
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(113 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Oster blender agitator /blade was heavily worn.

mark from Twin Falls, Idaho

24 of 24 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Replaced the hand removable screw-on blade and seal ring on an Oster blender. One has to remove the blade and sealing gasket to clean anyway, so there were no tools involved.
Did you find this story helpful?
Thank you for voting!

Existing agitator assembly leaked.

David from Newport News, Virginia

18 of 18 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Disassembled Container bottom and replaced all parts. I noticed that the old agitator assembly appeared to have worn bearing seals and wobbled, probably causing the leaking. I was a little worried because the replacement part numbers were off by a digit or two, but the replacement parts were the same size and fit perfectly. I reassembled and the blender no longer leaked.
Did you find this story helpful?
Thank you for voting!

The assembly was worn out. Blades dull and the drive was slipping.

Donald from Coventry, Connecticut

11 of 11 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
31014904000
Disassembled the base of the blender jar and replaced the old assembly with the new one. One snag: it vibrated badly at first. When I looked at the blades one was bent out too far. Straightened it with pliers and now it works fine.
The odd thing is, I remember when I got the blender I had exactly the same problem. I had to straight en one of the blades in the brand new blender.
Did you find this story helpful?
Thank you for voting!

Motor worked but blades didn\'t turn

Carol from EXCELSIOR, Minnesota

9 of 9 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Replaced blades and seal, which was old but not damaged. Surprised and pleased that I could find the right parts for a blender that is probably 25-30 years old.
Did you find this story helpful?
Thank you for voting!

Blade assembly froze up

Paula from San Diego, California

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Unscrewed bottom of blender jar, removed blade assembly and rubber ring, placed new blade assembly in bottom of jar with gasket, screwed bottom back on. Done.
Did you find this story helpful?
Thank you for voting!

Blender was leaking and blades were dull

Dale from Phoenix, Arizona

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Remove the old bottom, blades and seal
Place the new blades in the container
Put the seal on top of the blade base
Thread the assembly onto the jar
Did you find this story helpful?
Thank you for voting!

Leakage & smoke from chopper blades

Caroline from Hamburg, New York

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Installed new chopper blades and seal. No more smoke. It works great.
Did you find this story helpful?
Thank you for voting!

The blender was leaking

Carney from Evanston, Illinois

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000, 116668001000
Removed the old parts and put in the new ones. Pretty basic
works perfectly and doesn\'t leak anymore.
Did you find this story helpful?
Thank you for voting!

Agitator assy. was worn and it was making a loud noise

Jeryl from Trenton, New Jersey

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Unscrewed the old agitator assy and seal. Put new agitator and seal together and put in..It works great and saves me from buying a new one. Thank You
Did you find this story helpful?
Thank you for voting!

Blender agitator assembly

BAUDILIO from Deltona, Florida

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
31014904000
Took out the old part and install the new one, it is very easy to do just using my hands.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP17016441
Manufacturer Part Number: 31014904000
Brand Model Number Description
Oster 006694-015-RNP Blender - Blender
Oster 006830-000-000 Blender - 10-Speed Blender
Oster 006845-000-NP0 Blender - Blender
Oster 006878-042 Blender - Blender
Oster 4093-8 Blender - Classic Beehive Blender
Oster 4094 Blender - Classic Beehive Blender
Oster 4096 Blender - Beehive Blender
Oster 4119-022 Blender - Blender
Oster 4122 Blender - Beehive Blender
Oster 4123 Blender - Beehive Blender
Oster 4125 Blender - Kitchen Center Blender
Oster 4126 Blender - Contemporary Blender
Oster 4127 Blender - Contemporary Blender
Oster 4128 Blender - Contemporary Blender
Oster 4134 Blender - Contemporary Blender
Sunbeam 4141 Blender - Blender
Sunbeam 4141-8 Blender - Blender
Sunbeam 4143 Blender - Blender
Sunbeam 4144-8 Blender - Blender
Oster 4204 Blender - 2 Speed Glass Jar Stainless Steel Blender
Oster 4242 Blender - 2 Speed Blender
Oster 4258-022 Blender - 2 Speed Blender
Oster 4270-015 Blender - Blender
Oster 5000-25 Blender - Blender
Oster 6606 Blender - Blender
Oster 6607 Blender - Blender
Oster 6608 Blender - 14 Speed Blender
Oster 6628 Blender - Contemporary Blender
Oster 6628-009 Blender - Blender
Oster 6629 Blender - 10 Speed Blender