This is an authentic OEM sourced replacement part designed for use with Poulan gas powered blowers. Carburetor supplies a mixture of gas and air the engine. This kit includes a metal body carburetor, a rubber primer bulb and a plastic lever. Please note gaskets are sold separately. If the engine won't start or dies soon after starting the carburetor is likely the issue. Test carburetor by removing air filter and pouring about a teaspoon of fuel into carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. You would need a torx screwdriver to replace this carburetor. • Remove the air box cover, filter and base • Remove the old carburetor and install the new one • Re-assemble and test the unit
Troubleshooting
This part works with the following brands:
Poulan
Husqvarna
This part works with the following products:
Leaf Blower / Vacuum
Part# 545180811 replaces these:
545180811,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the air cover. Disconnect the fuel lines. Remove carburetor and throttle cable. Put new carburetor on and reassemble in reverse order.
If the lines are the same color it may be beneficial to mark the lines to reinstall them in the correct location on the new carb.
Remove the filter cover
Remove the filter
Remove the fuel lines and throttle from the carburetor
Remove the screws that hold the air box base and the carburetor
Remove the carburetor and gasket
Slide the screws from the air box base, through the new carburetor and gasket
Tighten up the screws
Inst
... Read moreall the fuel lines and throttle
Install the filter and filter cover
Read less
Did you find this story helpful?
Thank you for voting!
It would not start unless you added fuel directly into the carburator
1. Drained the fuel
2. Removed the fuel lines
3. Removed the old carburetor along with filter and idle arm
4. Replaced with new carburetor along with filter and idle arm
5. Replaced the fuel lines with new ones
6. Refilled the fuel tank, primed and it started right up!
Remove the air filter assembly
Removed the two screws holding the old carburetor
Removed the fuel lines and the throttle, then the carburetor
Screwed the back plate of the air filter and the new carburetor on
Hooked up the throttle and fuel lines
Replace the air filter assembly
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
