- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Kit Gasket 545008044
- Manufactured by:
- Husqvarna
- ERP Number:
- ERP16365371
- Part Number:
- 545008044
Does this part fit my model?
Need help finding your model number?Jump to:
Product Description
?This is a genuine Poulan overhaul engine kit designed for gas trimmers. This kit contains the necessary gaskets and seals needed to rebuild you engine. If engine runs sluggish or it dies shortly after starting it, you may need to replace some of the gaskets. Replacing these items you would need a screwdriver and pliers.
Frequently Purchased Together
?Troubleshooting
- Poulan
- Husqvarna
- Craftsman
- American Yard Products
- Trimmer
Customer Part Reviews
?- < Prev
- 1
- Next >

Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Replacing the carburetor
Doug from Murphy, North Carolina
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
- Parts Used:
- 545008044
then installed the new carb. Had to replace all tubing and old inline gas filter. The
gasket kit does not include new tubing or inline gas filter,these must be purchased
separately. The old tank had to have the gas line holes increased in th ... Read more e size to allow
the new heaver lines to fit. A drill makes short work of it.
All back together and running like a champ! The problem was running 10% ethanol
gas in the past. It eat up the plastic gas lines designated and clogged up the carb.
Do yourself a favor use NON ETHANOL gas only in your all of your two-cycle powered
equipment,chain saws,weed-eaters,blowers and similar small motors.
Engine locked up; it had been run without oil.
David from SILVERTON, Oregon
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Assembled all new parts for engine and reinstalled all external components and made all proper adjustments.
Tested and confirmed repair! Works great!!!
Weed eater would stall when idling up.
DAVID from HENDERSON, Kentucky
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
2. Removed fuel lines from carburetor.
3. Removed fuel tank.
4. Removed carburetor.
5. Removed carburetor cover.
6. Clean carburetor with carburetor cleaner.
7. Replaced carburetor gaskets.
8. Removed carburetor boot from motor.
9. Replaced carburetor boot.
10. R ... Read more einstalled carburetor.
11. Removed assembly pickup and fuel lines from fuel tank.
12. Replaced fuel lines and assembly pickup.
13. Reconnect fuel lines to carburetor.
14. Reinstall fuel tank.
15. Reinstall rear cover.
Unable to adjust original carburetor, wouldnGÇÖt run full power
Edward from New Whiteland , Indiana
Won\'t start.
Fred from Laurinburg, North Carolina
Piston had a broken ring
George from Antioch, Illinois
Weedeater had no compression and very very hard to start if at all
Dennis from BURLINGTON, Kansas
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
2. Removed cylinder
3. Removed piston off rod and old seals
4. Put new seals and gasket in place
5. Put new ring on piston and put piston back on rod. Make sure you put piston on just as it was
6. Put new cylinder back on
7. Asembled all the parts back on wee ... Read more deater
8. Reajusted carb and started right up and been using it since
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 545008044
| Brand | Model Number | Description |
|---|---|---|
| Craftsman | 358791140 | Trimmer - Trimmer |
| Craftsman | 358791170 | Trimmer - Gas Trimmer |
| Craftsman | 358795920 | Trimmer - Trimmer |
| Husqvarna | BC233 | Brush Cutter - B Brushcutter |
| American Yard Products | BC233B | Trimmer - String Trimmer |
| Husqvarna | BC433 | Brush Cutter - B Brushcutter |
| American Yard Products | BC433B | Trimmer - String Trimmer |
| Husqvarna | PP033 | Trimmer - Handheld Trimmer |
| Poulan | PP133 | Trimmer - Pro Gas Trimmer |
| Poulan | PP330 | Trimmer - Pro Gas Trimmer |
| Poulan | PP333 | Trimmer - Trimmer |
| Poulan | PP335 | Trimmer - Pro Gas Trimmer |
| Poulan | PP338PT | Trimmer - Gas Trimmer |
| Poulan | PPB330 | Trimmer - Grass Line Trimmer, Gas |
| Poulan | PPB335 | Trimmer - Gas Trimmer |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.