Part Location Diagram of K-119078 Kirby Fan Complete Lexan
See part A-39 in the diagram
( Grid squares measure 1x1 inch )

Fan Complete Lexan K-119078

Manufactured by:
Kirby
ERP Number:
ERP12040961
Part Number:
K-119078
Original Equipment Manufacturer ?
Special Order

Easy 

30 - 60 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is an authentic item which is supplied by the original equipment manufacturer for use with Kirby vacuums. The fan is an important component that produces the airflow. It is an identical replacement for a damaged or a missing part that was installed on a new unit. Make sure to check the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure. Note, one durable plastic fan and the hardware to secure it are included. A wrench set and a screwdriver will be needed to perform this repair.

Troubleshooting

This part works with the following brands:
  • Kirby
This part works with the following products:
  • Upright Vacuum

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The fan had shattered into several pieces.

Charles from Roslindale, Massachusetts

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
K-119078
Followed a video that showed every step to replacing a fan on the Kirby Horizon II vacuum which was a great help.
Did you find this story helpful?
Thank you for voting!

Fan was cracked

Kenneth from Waikoloa, Hawaii

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
K-119078
Changed fan, very easy.
Did you find this story helpful?
Thank you for voting!

Fan broke into pieces when a rock was vacuumed up.

Scott from Ravensdale, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
K-119078
Removed the bag an handle then removed the roller brush. Removed the screws from the fan housing and separated the housing body halves. Removed the right hand threaded belt rod/ fan shaft then repeated the process in reverse order with the new parts.
Did you find this story helpful?
Thank you for voting!

Plastic fan was broken. All the blades were broken off fan. Watched video on urube

Philip from Medina, Tennessee

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
K-119078
Watched video on YouTube demonstrating the complete replacement procedure. Easy to follow and emulate demo and parts from replacements were factory spot-on parts: perfect replacement parts. Ereplacementsparts is my first go-to site when I need parts for ANYTHING.
Did you find this story helpful?
Thank you for voting!

Vacuum sucked up coin and damaged fan blade

George from Tacoma, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
K-119078
Dissembled vacuum body to expose fan blade
removed damaged fan blade
replace new parts provided
reassemble vacuum body
Test
found a similar model on YouTube for reference.
reward myself with Blue Moon Beer!
Did you find this story helpful?
Thank you for voting!

Fan broke and headlight was burned out

DONALD from FLAGSTAFF, Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
K-301289, K-119078, K-109273
Watched the video on how to repair part - very helpful.
1. Removed screws holding housing assembly. 1 screw was difficult to remove - had to drill out head. Also removed vacuum bag.
2. Removed old fan blade,
3. Replaced fan blade
4. Reassembled housing.
5. Removed screws on headlight cover
6. Removed burned out headlight
7. Replaced with new headlight
8. Reattached headlight cover
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12040961
Manufacturer Part Number: K-119078
Brand Model Number Description
Kirby 1CB Upright Vacuum - Omega Vacuum
Kirby 1CR Upright Vacuum - Classic Vacuum
Kirby 1HC Upright Vacuum - Heritage Vacuum
Kirby 1HD Upright Vacuum - Heritage Vacuum
Kirby 2CB Upright Vacuum - Classic III Vacuum
Kirby 2HD Upright Vacuum - Heritage II Vacuum
Kirby 3CB Upright Vacuum - Traditional Vacuum
Kirby 516 Upright Vacuum - Upright
Kirby 517 Upright Vacuum - Upright
Kirby 518 Upright Vacuum - Upright
Kirby 519 Upright Vacuum - Upright
Kirby 560 Upright Vacuum - Upright
Kirby 561 Upright Vacuum - Upright
Kirby 562 Upright Vacuum - Upright
Kirby D50 Upright Vacuum - Two-Speed Vacuum
Kirby D80 Upright Vacuum - Two-Speed Vacuum
Kirby HeritageIILegend Upright Vacuum - Vacuum
Kirby LegendII Upright Vacuum - Vacuum
Kirby VII Upright Vacuum - Upright