11860418-1-M-Ryobi-940488345-Label Data P234g

( Grid squares measure 1x1 inch )

11860418-1-S-Ryobi-940488345-Label Data P234g

Label Data P234g 940488345

Manufactured by:: Ryobi
ERP Number:: ERP11860418
Part Number:: 940488345

$4.28

Easy

15 - 30 mins

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Troubleshooting Repair Instructions Model Cross Reference

Troubleshooting

This part works with the following brands:

Ryobi

This part works with the following products:

Impact Driver

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

15 - 30 mins

(2 rated repairs) ?

< Prev
1
Next >

Sort by:

Cover was broken

Campbell from Mantua , New Jersey

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver
Parts Used:: 940488345, 303974004, 201802003

Put cover on

Did you find this story helpful?

Impact drill fall on a ladder from a second floor unfinished deck. As I was putting in a aluminum soffit ceiling.

Pete from ashtabula, Ohio

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 940488345, 303974004, 201802003, 303001015

Remove the screws from the old impact. To remove the motor and trigger. Then installed them in the new housing. Replace the magnet that broke. Cleaned a little dirt from the motor. Saw dust etc. Cause the old impact was about 6 years old. Replace all the screws. And tested it out. It\'s almost like new.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP11860418
Manufacturer Part Number: 940488345

Brand	Model Number	Description
Ryobi	P234G	Impact Driver - 18 Volt Impact Driver