Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
11746826-1-M-Whirlpool-WP902461-Wash Impeller
Part Location Diagram of WP902461 Whirlpool Wash Impeller
See part 28 in the diagram
( Grid squares measure 1x1 inch )
11746826-1-S-Whirlpool-WP902461-Wash Impeller 11746826-2-S-Whirlpool-WP902461-Wash Impeller 11746826-3-S-Whirlpool-WP902461-Wash Impeller Part Location Diagram of WP902461 Whirlpool Wash Impeller

Wash Impeller WP902461

Manufactured by:
Whirlpool
ERP Number:
ERP11746826
Part Number:
WP902461
Original Equipment Manufacturer ?
  Works with your model  DWU9961AAE!
$47.25
On Order

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  Works with your model   DWU9961AAE!

Jump to:

Description Frequently Purchased Together Troubleshooting Repair Instructions Model Cross Reference

Product Description

?

This wash impeller is three inches in diameter. It is all gray in color and is made of plastic.

Frequently Purchased Together

?
O-Ring Seal
$7.65
Special Order

Troubleshooting

This part fixes the following symptoms:
  • Not cleaning dishes properly
  • Noisy
  • Not draining
This part works with the following brands:
  • Maytag
  • Jenn-Air
This part works with the following products:
  • Dishwasher
Part# WP902461 replaces these:
9-2461, 902461,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Part broke during disassembly.

Aaron from CHELSEA, Michigan

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Parts Used:
WP902461
1) Removed all layers of sprayer/pump assembly until impeller was exposed.
2) Removed screw holding impeller to motor shaft.
3) Pulled impeller, which broke the original impeller.
4) Fasten new impeller; reverse the disassembly.
Did you find this story helpful?
Thank you for voting!

It made a grinding noise and would not start a cycle

Robert from Yonkers, New York

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP902461
1. Removed lower basket
2. Lifted off spinning wash manifolds
3. Removed 6 screws hold cover of wash strainer and removed strainer
4. Removed 3 screws holding cover over impeller area
5. Removed screw holding broken impeller
6. Installed new impeller and new o-ring that goes on screw holding new impeller