This is a genuine Delonghi replacement part, It is sold individually. This O-Ring is used in a number of Delonghi products. Its purpose is to create a seal to keep fluids from leaking from the appliance.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Espresso Machine Maintenance
I have had a couple of DeLonghi Espresso machines for 10+ years. The o-rings for the steamer function require replacement occasionally. I get these from eReplacementParts rapidly and at a good price.
Guest - April 30, 2019
Verified Purchase
★★★★★
★★★★★
Solved the problem
So glad I was able to find the part- fits perfect!
Guest - May 28, 2019
Verified Purchase
★★★★★
★★★★★
Replaced lost o ring
yay! This was a great replacement for the lost o ring on my Delonghi Magnifica latte wand!
Guest - June 12, 2019
Verified Purchase
★★★★★
★★★★★
Easy to find replacements
Needed O-ring replacement on my Delonghi coffee maker. So easy to find and order part needed. Thanks so much.
Guest - September 16, 2019
Verified Purchase
★★★★★
★★★★★
Exact part.
Exactly what I needed.
Guest - November 16, 2019
Verified Purchase
★★★★★
★★★★★
Just Right
Measured the o-rings I needed and ordered them up. Arrived timely and fit perfectly. No more leaks on my Espresso machine. Thanks for fixing me up and saving me a ton of money!
Guest - February 4, 2022
Verified Purchase
★★★★★
★★★★★
perfect
Am so happy to find what I needed for my older expresso maker. Part claim very quick.
Guest - January 23, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
When using steam nozzle, steam appeared to be coming out of nozzle but milk was not frothing. Further investigation revealed that steam appeared to be leaking from top of removable nozzle. Looked at parts diagram on replacementparts website and realized that o\'ring was missing (unsure of how it became dislodged and where it was). No too
... Read morels needed to connect new o\'ring and steam is working correctly.
Read less
Did you find this story helpful?
Thank you for voting!
I lost the o-ring from the steam spout on my espresso maker
Could find nothing wrong but it still leaked after replacing o-rings. Finally determined that calcification on the condensate drain was allowing water to flow up the side then back down to the counter top. I cleaned it w vinegar, a toothbrush and dental floss. Not a drop on the counter now.
Replace O-rings one at a time using tooth pick. Did not work.
Removed back, sides, and front control panel using Philips screwdriver, removed Hot Water Outlet assembly ( one screw) removed retainer clip with needle nose pliers and removed steam line. Inserted steam line into new part and secured with retaining clip. Screwed back on
... Read moreparts.
Milk steamer works like new!
Spent $9.00 on O-rings( green, red, black) and $6.11 on Hot Water Outlet assembly which includes the three O-rings. Buy the assembly!
Removed old o-rings with fingernails and replaced. It is not clear that the o-rings needed replacing or just the milk jug, but the o-rings alone did not fix the problem. Works like new now.
1 Removed back and L side of coffee maker, Removed coffee press capsule via port behind water reservoir. Lift top off
2 Remove 4 screws holding press capsule together, take pix so levers on bottom can be put in exactly same position. Then remove piston, the remove O-rings, clean grooves thoroughly, grease new rings, and replace them
... Read more 3 Remove center phillips screw on screen on piston top, clean thoroughly w soap/water and replace
3A. Reassemble piston into press capsule, take care to insert the spring under the top level lever, and refer to your picture to reassemble to press capsule.
4. Examine tube location, remove and replace. DO not disassemble steam generator unless A. there is evidence of leakage or your unit is not producing adequate steam on steam setting.
5. Re-assemble tops side and back.
The milk frother was cracked so it wasn\'t making a tight seal. Also, the gasket had come off but I didn\'t know that. So I replaced with the new nozzle, then it still didn\'t work. When I looked down on the floor, my cat was playing with a little rubber ring. The gasket! I put it on (after washing it) and works great!
1. Realized O-rings had gone bad, and ordered replacements.
2. Remembered which went where.
3. Used my fingers to put the replacements in place, in the right sequence.
4. Saved $125 repair fee.
Espresso Machine
- Superautomatic Capachino System Version: Us, Ca
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/small-appliance/coffee-maker/seals-and-gaskets/"},{"position":2,"name":"5313217751","title":"5313217751","url":""}]
