Part Location Diagram of 188-17-1 Walbro Primer Bulb
See part A in the diagram
Replacing your Walbro Engine Primer Bulb
( Grid squares measure 1x1 inch )

Primer Bulb 188-17-1

Manufactured by:
Walbro
ERP Number:
ERP9912187
Part Number:
188-17-1
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(9 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine OEM replacement part designed for use with Walbo carburetor. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. At some time the primer will lose its elasticity or crack and need to be replaced. It is made out of rubber and it is sold individually.

Troubleshooting

This part works with the following brands:
  • Walbro
  • Weed Eater
This part works with the following products:
  • Engine
  • Trimmer
Part# 188-17-1 replaces these:
188-16, 188-16-1, 188-17-1,

Videos For installing this part.

?
Replacing your Primer Bulb

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
  • 5 stars
    6
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Primer bulb was cracked and tank leaked.

Andrew from Imperial, Missouri

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
545103802, 188-17-1
Changed the primer blub and the gas tank. Easy!
Did you find this story helpful?
Thank you for voting!

Primer bulb old and cracked

Ron from Spring City, Utah

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
188-17-1
Unscrewed the primmer base, and removed the old primmer. Installed the new primmer in the base and screwed the base to the carburetor
Did you find this story helpful?
Thank you for voting!

Old primer bulb cracked, leaking gas.

Tedmund from JACKSONVILLE, Arkansas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
188-17-1
1. Cleaned all dirt from around the old bulb with a soft brush.
2. Removed the screws and the plate holding the old bulb.
3. Set the new bulb in place.
4. Replaced the original plate and the screws.
5. Primed the engine and it started perfectly with no leaks.
Did you find this story helpful?
Thank you for voting!

Hedge clipper would not crank

Jim from Montgomery, Alabama

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
188-17-1
Used screwdriver to remove primer bulb and mounting plate. Inserted new bulb into plate and reattached with screws. Tested by cranking hedge trimmer. Worked like new.
Did you find this story helpful?
Thank you for voting!

Primer bulb broke.

Arthur from Live Oak, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
188-17-1
I removed the old broken primer bulb by unscrewing the two screws holding the capture clamp. Removed the old primer and inserted the new ptimer bulb. Replaced the screws holding the clamp and tightened them. Tried the primer and it worked as it should.
Did you find this story helpful?
Thank you for voting!

Carb was plugged up

David from Council Bluffs, Iowa

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
K23-WAT, 188-17-1
I disassembled the carburetor, cleaned it, reassembled it.
Did you find this story helpful?
Thank you for voting!

It needed all new parts for my sthil trimmer carb primer button starter coil with new spark plug it wasn\'t running well but it sure is now thanks I will use yall again when I need new parts

Zachary from Dover, Arkansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
188-17-1
Screw driver n n a wrench n I got em all replaced thanks yall it went well
Did you find this story helpful?
Thank you for voting!

Engine would not run.

Billy from Duncanville, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
530071458, K20-WAT, 188-17-1
After seeing engine ignition working properly, suspected a fuel problem. Removed carburetor, got model number and ordered repair kit. Cleaned outside and all internal ports of carb. with carb. cleaner. Installed new parts and reassembled carb. Installed carb. on blower. Problem solved.
Did you find this story helpful?
Thank you for voting!

Primer leaking gas

reginald from lanham, Maryland

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
188-17-1
Removed the primer bulb base and the old primer bulb.
Installed the new primer bulb to the base , then screwed down the base.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9912187
Manufacturer Part Number: 188-17-1
Brand Model Number Description
Weed Eater FL26 Trimmer - Gas Trimmer
Weed Eater SST Trimmer - Gas Trimmer
Walbro WA-224-1 Engine - Carburetor
Walbro WA-226-1 Engine - Carburetor
Walbro WA-228-1 Engine - Carburetor
Walbro WA-229-1 Engine - Carburetor
Walbro WA-230-1 Engine - Carburetor
Walbro WA-232-1 Engine - Carburetor
Walbro WT-499-1 Engine - Carburetor
Walbro WT-517-1 Engine - Carburetor
Walbro WT-555-1 Engine - Carburetor
Walbro WT-556-1 Engine - Carburetor
Walbro WT-582-1 Engine - Carburetor
Walbro WT-583-1 Engine - Carburetor
Walbro WT-589-1 Engine - Carburetor
Walbro WT-603-1 Engine - Carburetor
Walbro WT-622-1 Engine - Carburetor
Walbro WT-627-1 Engine - Carburetor
Walbro WT-628-1 Engine - Carburetor
Walbro WT-629-1 Engine - Carburetor
Walbro WT-6351 Engine - Carburetor
Walbro WT-924-1 Engine - Carburetor
Walbro WTS-1-1 Engine - Carburetor