Carefully disassemble the carburetor, making note of all parts and where they go. Keep parts in a magnet tray or suitable container so they do not get lost.
Clean the carburetor in a carburetor cleaning solution (1 gallon dip tank) for 15 minutes. Use rubber gloves as the carb cleaner is extremely toxic
Carefully clean off an
... Read morey gasket materials that did not come off with the dipping
Blow off all cleaning solution and spray carb body with spray carb leaner
Blow out the carb again ensuring all cleaning solutions have been removed
Reassemble the carburetor with the new gaskets and needle valve
Lightly oil linkages and reinstall carburetor into chainsaw
Start chain saw and adjust the slow speed jet until engine runs smooth
Adjust high speed jet with engine revved up. Listen for smoothness and ensure engine does not stall when going from slow to high speed
Adjust throttle position screw so that the saw chain does not turn when the engine is running at idle
Readjust the low and high speed jets again if necessary
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10048124
Manufacturer Part Number: K10-WS
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
