Part Location Diagram of 88-119-8 Walbro Plug Cup
See part 19 in the diagram
( Grid squares measure 1x1 inch )

Plug Cup 88-119-8

Manufactured by:
Walbro
ERP Number:
ERP10019029
Part Number:
88-119-8
Original Equipment Manufacturer ?
  Works with your model  HDA-49-1!
$6.16
Special Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   HDA-49-1!

Product Description

?

This is an original replacement part sourced directly from the manufacturer. The cup plug is commonly found in Walbro carburetors. This part is made of metal, and is used to help prevent leakage in the nozzle assembly of the carburetor. This item is sold as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Walbro
This part works with the following products:
  • Engine
Part# 88-119-8 replaces these:
88-119, 88-119-8,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Engine surged at idle.

Michael from Pineville, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set, Wrench set
Parts Used:
88-119-8, 11061-7009
Removed air breather from mower to access the carburetor. Removed bowl with a 13mm wrench. Removed old bowl gasket and replaced with new one. Installed bowl on carburetor. For the cup plug, I had to use the small punch and hammer to set the plug in the carburetor. Be careful not to damage the plug and make sure it is seated all the way. I ordered a few extras just in case. The plug was $0.99 and it saved me from replacing a $300 carburetor.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10019029
Manufacturer Part Number: 88-119-8
Brand Model Number Description
Walbro AT-1-1 Engine - Walbro Small Engine Model AT-1-1 (AT11, AT 1 1) Parts
Walbro AT-2-1 Engine - Walbro Small Engine Model AT-2-1 (AT21, AT 2 1) Parts
Walbro HD-20-1 Engine - Carburetor
Walbro HDA-10-1 Engine - Carburetor
Walbro HDA-102-1 Engine - Carburetor
Walbro HDA-105-1 Engine - Carburetor
Walbro HDA-110-1 Engine - Carburetor
Walbro HDA-114-1 Engine - Carburetor
Walbro HDA-123-1 Engine - Carburetor
Walbro HDA-128-1 Engine - Carburetor
Walbro HDA-13-1 Engine - Carburetor
Walbro HDA-131-1 Engine - Carburetor
Walbro HDA-132-1 Engine - Carburetor
Walbro HDA-133-1 Engine - Carburetor
Walbro HDA-137-1 Engine - Carburetor
Walbro HDA-14-1 Engine - Carburetor
Walbro HDA-140-1 Engine - Carburetor
Walbro HDA-141-1 Engine - Carburetor
Walbro HDA-145-1 Engine - Carburetor
Walbro HDA-15-1 Engine - Carburetor
Walbro HDA-151-1 Engine - Carburetor
Walbro HDA-157-1 Engine - Carburetor
Walbro HDA-16-1 Engine - Carburetor
Walbro HDA-17-1 Engine - Carburetor
Walbro HDA-177-1 Engine - Carburetor
Walbro HDA-179-1 Engine - Carburetor
Walbro HDA-18-1 Engine - Carburetor
Walbro HDA-189-1 Engine - Carburetor
Walbro HDA-19-1 Engine - Carburetor
Walbro HDA-20-1 Engine - Carburetor