Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
snow storm
Although a winter storm delayed the delivery, I am thankful that you guys are out there for these parts and perhaps for a chat for advice and instruction. My snowblower works strong now. Thanks.
Guest - January 3, 2021
Verified Purchase
★★★★★
★★★★★
Never got it.
Never received my parts.Waited 7 days. When I called they said wait until Friday. I called back Friday they said they must be lost and I would have to go back & reorder. Well that is what I did through Amazon. I tried to use the smaller guy 1st.
Guest - July 17, 2019
Verified Purchase
July 17, 2019
Hi Dan,
Thank you for your review. Please accept our apologies that your order was lost in shipping and for any inconvenience that this situation has caused you. If there is anything that we can help you with in the future, please do not hesitate to ask.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
1- 2 hours
(4 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Remove the air cleaner assembly
Empty the fuel tank
Remove fuel hose from the carburetor
Remove the carburetor
Remove the carburetor linkage
Rebuild the carburetor
Put it back together in reverse order
Did you find this story helpful?
Thank you for voting!
Hard Starting -- Lawn Mower
Rodney from Milford, Connecticut
9 of 9 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Drained The Gas -- Flipped The Mower On It\'s Side -- Replace the # 37 part - 2 Rubber O Rings - Complete Sprayed The Carburetor Into All Opening at the bottom & Air intake With A Can Of Carburetor Cleaner To Dissolve Buildup in it -- 2 Times and let it Set & Dry -- Replaced the Spark Plug and Added New Gas -- Primed The carburetor 5 tim
... Read morees to get gas in it -- Pulled the Starter Cord a few times and Bingo -- Added gas additive along with the new gas in the tank to prevent gas residue build up! The Problem seem to be Gas Residue that built up in the Carburetor over time!
Read less
Did you find this story helpful?
Thank you for voting!
Wouldn\'t run smoothly.
Len from Lemont, Illinois
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Pulled the carburetor off and rebuilt it. The idle jet was completely clogged. You\'ll need a very small diameter wire to clean it. I used a strand of copper wire. Reassembled and runs like new. Check for videos on how to do it. Very simple if you have ever turned a wrench.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9292601
Manufacturer Part Number: 632760B
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2006)_WW_1.gif "Part Location Diagram of 632760B Tecumseh Engine Carburetor Repair Kit")
(2006)_WW_1.gif "Part Location Diagram of 632760B Tecumseh Engine Carburetor Repair Kit")
