1. Removed and disassembled carburetor
2. Cleaned spray carb cleaner
3. Used small wire to clear tiny holes
4. Removed and cleaned needle valves
5. Installed new diaphragm and reassembled
6. Installed new spark plug
1. Remove four screws holding the carburetor diaphragm plate
2. Remove the two fuel mixture adjustment screws
3. Scrap with a single edge razor blade the old gasket from the carburetor and diaphragm plate.
4. Blow out the fuel mixture ports with gum out and clean the carburetor fuel bowl with the same.
5. Assemb
... Read morele the new diaphragm, gasket and plate installing the four screws.
6. Install the metering needle screws with an initial 1 turn out for each
7. Start engine and adjust the metering screws.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9050170
Manufacturer Part Number: 630978
Engine
- Tecumseh Small Engine Model 1400-1449 (14001449, 1400 1449) Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.