Part Location Diagram of 37610 Tecumseh Engine Gasket
See part E-306 in the diagram
( Grid squares measure 1x1 inch )

Engine Gasket 37610

Manufactured by:
Tecumseh
ERP Number:
ERP8959904
Part Number:
37610
Original Equipment Manufacturer ?
  Works with your model  20072A!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

1- 2 hours 

(4 rated repairs) ?
  Works with your model   20072A!

Product Description

?

This is a genuine replacement part manufactured for use with small engines that are commonly installed on riding lawnmowers. The gasket fits into the crankcase and is used to seal the oil fill tube. This gasket is available as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Tecumseh
  • Craftsman
  • Toro
  • Cub Cadet
  • Husqvarna
  • Briggs and Stratton
This part works with the following products:
  • Engine
  • Lawn Mower
Part# 37610 replaces these:
36996, 37610,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

1- 2 hours 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Oil fill tube broke

Heath from Dutton, Alabama

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver
Parts Used:
37610, 35647A, 35499
Remove the screw from the broken oil tube and remove it.
Install the gasket and o-ring on the new tube and screw it in.
Did you find this story helpful?
Thank you for voting!

No power, engine ran rough.

John from MOUND, Minnesota

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
35395, 37610, 35647A, 35648, 35499
Replaced starter recoil
Replaced spark plug
Replaced air filter
Cleaned carb
Changed oil
Replaced oil fill tube and dipstick and used new gaskets

It was not a difficult job. Any DIY person could figure it out fairly easily. All the parts are easy to get to and not too complicated to remove or rep lace.
Did you find this story helpful?
Thank you for voting!

Cracked oil fill tube

William from Taylor Mill, Kentucky

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
37610, 35647A
1Removed top cover.
2 Cleaned area around the dip stick oil tube.
3 Removed the cracked oil tube.
4 Cleaned oil fill hole, and checked to make sure there were no damage to the housing.
5 Installed gasket and applied a coat of clean oil.
6 Installed new dip stick tube.
7 Cleaned debris from cooling fin s, and replaced top cover.
8 Filled engine with oil recommended for that model.
9 Started and ran engine until warm.
10 Checked for leaks and there were none.
11 Ready to cut grass.
Did you find this story helpful?
Thank you for voting!

blade was leaving grass...Blade adaptor key was worn,,,,Also replaced drove belt

David from Titusville, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
50-204, 91-2258, 37610, 37613A, 35499
Great...

Blade adaptor key was worn,,,Replace with new blade Adapter. Spacer was ordered separately .,Also replaced drive belt.


Parts fit perfectly.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8959904
Manufacturer Part Number: 37610
Brand Model Number Description
Briggs and Stratton 01055-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01055-0 (010550, 01055 0) Parts
Craftsman 143003504 Engine - Engine
Craftsman 143003508 Engine - Engine
Craftsman 143003802 Engine - Engine
Craftsman 143004000 Engine - Engine
Craftsman 143004004 Engine - Engine
Craftsman 143004008 Engine - Engine
Craftsman 143004010 Engine - Engine
Craftsman 143004012 Engine - Engine
Craftsman 143004014 Engine - Engine
Craftsman 143004016 Engine - Engine
Craftsman 143004018 Engine - Engine
Craftsman 143004500 Engine - Engine
Craftsman 143004502 Engine - Engine
Craftsman 143004504 Engine - Engine
Craftsman 143004506 Engine - Engine
Craftsman 143005004 Engine - Engine
Craftsman 143005006 Engine - Engine
Craftsman 143005008 Engine - Engine
Craftsman 143005500 Engine - Engine
Craftsman 143005502 Engine - Engine
Craftsman 143005504 Engine - Engine
Craftsman 143005506 Engine - Engine
Craftsman 143005508 Engine - Engine
Craftsman 143005510 Engine - Engine
Craftsman 143005512 Engine - Engine
Craftsman 143006000 Engine - Engine Made By Tecumseh
Craftsman 143006002 Engine - Engine
Craftsman 143006004 Engine - Engine
Craftsman 143006006 Engine - Engine