Part Location Diagram of 279-15001-33 Subaru Gasket (head)
See part A-620 in the diagram
( Grid squares measure 1x1 inch )

Gasket (head) 279-15001-33

Manufactured by:
Subaru
ERP Number:
ERP9933457
Part Number:
279-15001-33
Original Equipment Manufacturer ?
  Works with your model  EX270DS5021!
$20.58
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   EX270DS5021!

Product Description

?

It is an authentic manufacturer-sourced replacement gasket which is specially designed for use with Subaru/Robin engines commonly installed on lawn and garden equipment. This carburetor gasket provides an air-tight seal for the cylinder head, over time gaskets tend to wear out and may begin to crack eventually requiring a replacement. It is made of high-quality metal and is sold individually.

Troubleshooting

This part works with the following brands:
  • Subaru
  • Makita
This part works with the following products:
  • Engine
  • Generator

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Leaking valve cover gasket

William from Havana, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
279-15001-33
Remove spark plug from head and rotate engine to top dead center. Remove fuel line and carburetor linkage, remove 4 bolts holding down valve cover, remove from head, remove rocker arms, remove cam shaft pin bolt and pin removing cam shaft. Removed five head bolts and head. Clean cylinder head and top of engine block. Reassemble all parts in reverse order Coating cylinder head gasket with copper coat sealer when reinstalling head gasket, torquing all bolts to manufacture specifications. Do not use sealer on Valve cover gasket.
Did you find this story helpful?
Thank you for voting!
  • 1