Remove the air cleaner assembly. ereplacementparts has a you tube video on this subject. Here it is https://www.youtube.com/watch?v=faM2nla4_u4 . Empty the fuel from the tank or use some tube clamp pliers to stop the flow of fuel. Remove the carburetor from the engine. Remember where the spring and throttle where locate
... Read mored. Then start removing the parts from the carb. and laying them on a clean towel. Once all the parts are off, clean the carb. with carb, cleaner. I did use some fishing line to clean out the small passages. Once it was clean and dry, I started to assemble it. I replaced the needle, cup and bowl o-ring. Then installed the float bowl with the o-ring and bolt. Installed the insulator with the gaskets on both sides of it. I then installed the new union and all of the parts attached to it. I removed the muffler, then the gasket and cleaned the area before I installed the new muffler gasket.
Removed the rocker arm cover and replaced the gasket beneath it. Installed a new fuel filter in the tank. Then before I installed the air cleaner, I exchanged the old packing (gasket) for the new one.
Running great again.
Pulled carburetor off. Soaked in carburetor cleaner overnight. Pulled all jets out and cleaned them. Oxygen and Acetylene Tip Cleaning tool used to make sure all jets were clean. Replaced the needle valve. Installed new gaskets. Runs!
Did you find this story helpful?
Thank you for voting!
Carb had dried up gasoline in it. Parts needed for overhaul
Removed carburetor air filter & mounting assembly
Removed carburetor from engine
Disassembled carburetor- removed old bowl gasket, needle valve, removed & soaked two air jets in carb cleaner and carefully dipped carburetor into carb cleaning solution (making sure NOT to dip plastic carburetor parts into the cleaning solution)
... Read more Reassembled carburetor with new parts & cleaned air jets
Remounted carburetor to engine
Remounted air cleaner mounting
Installed new element & old cover
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9933176
Manufacturer Part Number: 277-62500-08
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
