Part Location Diagram of 277-42801-23 Subaru Rod Spring
See part E- in the diagram
( Grid squares measure 1x1 inch )

Rod Spring 277-42801-23

Manufactured by:
Subaru
ERP Number:
ERP9933090
Part Number:
277-42801-23
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(9 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This rod spring is an original part that is designed for use with Subaru / Robin engines commonly installed on a variety of lawn and garden equipment. The spring applies tension on the governor rod allowing it to retract. Over time it may wear out and lose tension eventually requiring a replacement. It is made of high-quality metal and is sold as an individual component. Check the diagrams for your model for the exact location and the correct installation of this rod spring. It is a simple repair that should only require pliers to remove the old part and attach the new one.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Subaru
  • Makita
This part works with the following products:
  • Engine
  • Water Pump
  • Generator
Part# 277-42801-23 replaces these:
277-42801-13, 277-42801-23,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(9 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Engine surging cutting out, springs stretched out.

Dan from Greenville, North Carolina

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
277-42801-23, 277-42510-23
I just needed to look where and how the old springs were attached. Then installed the new ones. Mower is working fine now
Did you find this story helpful?
Thank you for voting!

Spring broke.

Eduardo from ARECIBO, Puerto Rico

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
279-42502-73, 277-42801-23
I just replaced the springs. No special instructions.
Did you find this story helpful?
Thank you for voting!

Fuel leak at and around carburetor bowl

Mark from Kenna, West Virginia

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Removed carburetor, removed bowl. Cleaned gasket surface and bowl. Smoothed surfaces. Replaced gasket, o-ring, washer and spring. Leak fixed.
Did you find this story helpful?
Thank you for voting!

could not use Element was to small

Hector from CORPUS CHRISTI, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
279-42502-73, 277-42801-23
added both springs with pliers no problems, excellent parts and speedy delivery...ty!
Did you find this story helpful?
Thank you for voting!

Springs rusted and broke

steve from GOSHEN, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Replaced old springs
Did you find this story helpful?
Thank you for voting!

Just needed new parts and they were not attached right

Matthew from Gresham, Oregon

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Cleaned carburetor, attached insulater, reattached to the engine, added new springs and completed assembly.
Did you find this story helpful?
Thank you for voting!

Governor springs broke

Patrick from Bogalusa, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
279-42502-73, 277-42801-23
Replaced broken springs
Did you find this story helpful?
Thank you for voting!

Spring corroded broken

Carlos from St. Petersburg, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
277-42801-23, 277-42701-23
R and R spring
Did you find this story helpful?
Thank you for voting!

Governor spring and rod spring were rusted into.

john from kenner, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
277-42801-23
Removed old springs and installed new ones. adjusted engine governor speed
Did you find this story helpful?
Thank you for voting!
  • 1