It is a genuine OEM component which is specially produced for use with a Subaru / Robin engines that are commonly installed on a variety of lawn and garden equipment. This replacement part provides a tight seal for the float chamber body. Unfortunately, over time the material may wear out or get damaged eventually requiring a replacement. Please make sure to check appropriate diagrams of your model for the correct application. It is made of a durable material and is sold individually. You will need a wrench to remove and resecure the bolt that secures it to the float chamber body.
First drain gas tank or if you have a shut off valve to stop gas from leaking when you remove the gas bowl. Remove bowl by using a small wrench or socket, remove old gasket and clean make sure new gasket is seated in grove around carburetor float, replace gas bowl, replace bolt in bottom of bowl do not over tighten.
Subaru-powered pressure washer started leaking gas as soon as the fuel valve was turned on. At first it appeared to be above the carburetor, but after disassembly and reviewing other helpful comments here, it was clear that it was just the bowl gasket. The small packing in the bowl screw had also disintegrated over time. After removing th
... Read moree bowl and giving a thorough cleaning--including using a single strand of a wire brush to clear out the jet--installed the new bowl gasket and packing. No more leaks! Pressure washer is running great now. Thanks to the other helpful reviewers here. If it weren\'t for the gasket recommendation, I would\'ve been at a loss of where to start.
Tilted the motor up to have easy access to the carburetor. Pulled out the old gasket with a metal pick. Yeah it was cracked. Carefully inserted the new gasket. Had to stretch the gasket a little bit to get it in tight. The gasket for the mounting bolt didn\'t really seal up and gas still dripped. Found a rubber o-ring for the bolt and tha
... Read moret solved the leak.
This was just prevention/routine maintenance, not repair.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/engine/seals-and-gaskets/"},{"position":2,"name":"214-62450-08","title":"214-62450-08","url":""}]
