This replacement air cleaner element is manufactured for use with Kohler engines installed on lawn and garden equipment. It is a genuine part that is used to filter out dust and debris from entering carburetor and the engine. It is made out of plastic with paper pleated filter and it is sold individually. Replacing this item is a simple task that will not require any tools. • Remove the cover • Replace the filter element • Reattach the cover
Removed valve cover, replaced gasket, reinstalled valve cover. checked for leaks. (none). Then I removed the air cleaner cover, removed the old air cleaner and placed the new one in, then installed the air clean cover back on
Did you find this story helpful?
Thank you for voting!
Sat too long this last winter, also mice made a hotel in the engine compartment.
Ray from Celeste, Texas
3 of 3 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Simple, drill down method. Start at the top, remove the old, eaten, or otherwise worn out items until satisfied with whats left. Reinstall in reverse order, test run, mow yard.
Did you find this story helpful?
Thank you for voting!
The valve cover gasket was a little worn and the air cleaner needed changing.
1. Removed the hood.
2. Removed the gasket cover.
3. Cleaned the part where the new gasket goes.
4. Replaced the old gasket with the new gasket.
5. Opened the cover and changed the old air cleaner with the new one.
Did you find this story helpful?
Thank you for voting!
dipstick broke inside engine grrr Kohler SV540
David from Bow, Washington
1 personfound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
pulled closure plate,
be sure to look at the cams, levers and valve stems before reassembly,
read the entire instructions in the manual before starting...
and check those cam gears for proper alignment
don\'t over torque closure plate.
Did you find this story helpful?
Thank you for voting!
After replacing the 3 filters, I ordered more to prepare for next years Spring tune up.
1. Air filter - Loosen 2 butterfly nuts securing cover, open, discard used filter, install new filter, secure cover with butterfly nuts.
2. Oil filter - Drain engine oil. Remove old oil filter, fill new filter with fresh oil, install new oil filter. Refill engine with new oil.
3. Gas filter - Use pliers to squeeze hose clamps
... Read more and slide about 2 inches away from each side of old gas filter. Remove old gas filter from gas hoses. Install new gas filter into gas hoses. Use pliers to squeeze hose clamps and slide to secure filter.
1. Drain the oil.
2. Remove the old oil filter.
3. Install the new oil filter.
4. Add the oil.
5. Remove the old air filter.
6. Install the new air filter.
7. Remove the old fuel filter.
8. Install the new fuel filter.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2009)_WW_4.gif "Part Location Diagram of 2008306-S Kohler Element, Air Cleaner")
(2009)_WW_4.gif "Part Location Diagram of 2008306-S Kohler Element, Air Cleaner")
