Part Location Diagram of 1704103-S Kohler Kit, Intake Gasket
See part A-9 in the diagram
( Grid squares measure 1x1 inch )

Kit, Intake Gasket 1704103-S

Manufactured by:
Kohler
ERP Number:
ERP9902082
Part Number:
1704103-S
Original Equipment Manufacturer ?
  Works with your model  XT800-2003!
$18.56
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   XT800-2003!

Product Description

?

A genuine item which is supplied directly from the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. It is a high-quality kit which includes three durable composite material gaskets, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the material may wear out and begin to crack eventually requiring a replacement.

Troubleshooting

This part works with the following brands:
  • Kohler
This part works with the following products:
  • Engine
  • Chainsaw
Part# 1704103-S replaces these:
17 041 03-S,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The filter container was warped and the gasket to the carb gasket leaked because the filter compartment was warped.

Phillip from HARRISON, Arkansas

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
1474303-S, 1704103-S, 1408315-S
Completely removed the filter compartment and carburetor and disconnected linkage to carburetor, and gas line from fuel tank and suction line for filter housing. replaced gasket and installed new and improved filter body and installed new filter and reattached linkage and fuel line.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9902082
Manufacturer Part Number: 1704103-S
Brand Model Number Description
Kohler CH260-0011 Engine - Engine
Kohler CH260-0012 Engine - Engine
Kohler CH260-0101 Engine - Engine
Kohler CH260-0102 Engine - Engine
Kohler CH260-0103 Engine - Command Pro Single-Ch Series Engine
Kohler CH260-0104 Engine - Zhejiang Gemei
Kohler CH260-0105 Engine - Shenzhen
Kohler CH260-0106 Engine - Basic
Kohler CH260-0107 Engine - Command Pro Single-Ch Series Engine
Kohler CH260-1011 Engine - Engine
Kohler CH260-1012 Engine - Engine
Kohler CH260-1013 Engine - Basic
Kohler CH260-1097 Engine - Basic
Kohler CH260-1101 Engine - Engine
Kohler CH260-1102 Engine - Engine
Kohler CH260-1103 Engine - Zhenjiazng Luxinda
Kohler CH260-3101 Engine - Basic
Kohler CH260-3102 Engine - Command Pro Single-Ch Series Engine
Kohler CH260-3103 Engine - Command Pro Single-Ch Series Engine
Kohler CH260-3104 Engine - Command Pro Single-Ch Series Engine
Kohler CH260-3105 Engine - Command Pro Single-Ch Series Engine
Kohler CH260-3106 Engine - Command Pro Single-Ch Series Engine
Kohler CH260-3108 Engine - Command Pro Single-Ch Series Engine
Kohler CH270-0011 Engine - Engine
Kohler CH270-0012 Engine - Engine
Kohler CH270-0013 Engine - Engine
Kohler CH270-0014 Engine - Engine
Kohler CH270-0015 Engine - Engine
Kohler CH270-0016 Engine - Engine
Kohler CH270-0017 Engine - Engine