Part Location Diagram of 1485349-S Kohler Kit, Carburestor
See part H-1485321-S in the diagram
( Grid squares measure 1x1 inch )

Kit, Carburestor 1485349-S

Manufactured by:
Kohler
ERP Number:
ERP9893851
Part Number:
1485349-S
Original Equipment Manufacturer ?
  Works with your model  XT149-0311!
In Stock
Delivers in 3-5 Business Days!

Easy 

1- 2 hours 

(6 rated repairs) ?
  Works with your model   XT149-0311!

Product Description

?

This genuine OEM part is designed for use with Kohler engines commonly installed on a variety of lawn and garden equipment. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. To complete this repair you would need a screwdriver and a wrench set. Note, the kit includes one durable metal body carburetor and two gaskets to ensure a tight fit.

Troubleshooting

This part works with the following brands:
  • Kohler
This part works with the following products:
  • Engine
Part# 1485349-S replaces these:
14 853 49-S, 14-853-49-S,

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(11 Reviews)
Click to filter by ratings:
  • 5 stars
    10
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    1
  • 1 star
    0
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

1- 2 hours 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Engine ran fine with starter fluid but would not start, hot or cold, even after carb cleaning

Jeffrey from Chester, Virginia

12 of 12 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set, Wrench set
Parts Used:
1485349-S, 1422719-S, 1418704-S
Convinced the carb was still the issue despite cleaning attempts, and since I was replacing the carb, to bring the mover back to practically new specks (It was 4 years old), I replaced the carb, choke, and diaphragm. Fuel frequently evaporates around the gas cap, so I am also replacing the gas cap since ethanol fuel is such a problem now adays

1. Removed the starter (71\"Lbs)
2. Removed the engine housing
3. Clamped and disconnected the fuel line (Small amount of gas drained)
4. Removed the air filter housing and air filter
5. Removed the three carb retaining nuts (71\"Lbs)
6. Unplugged the spark plug
7. Removed the auto choke retaining nuts (No torque specs, just moderately tight)
8. Removed the choke torx screws (2)
9. Removed the diaphragm torx screws (2)
10. Removed the vacuum lines going to the carb/air cleaner housing
11. Completely removed the air cleaner housing
12. Completely removed the choke assembly
13. Completely removed the diaphragm assembly
14. Removed all linkages, used a small pair of needle nose on the throttle spring
15. Removed the old carb and gaskets
16. Pulled the old gas cap out of the tank (The fingers are plastic and will bend with a small amount of force)
17. Swapping old parts with new parts, assemble by reversing disassembly steps. Ensure you put in the two new carb gaskets and torque everything as documented by Kohler

By about halfway through a starter pull, the engine was running. It had not started that fast since it was new, and ran like new once re-assembled. You can probably cut the expense by a third if you just replace the carburetor, but I wanted a like new machine starting over again for at least 4 years. Pay close attention to fuel stabilizers and emptying the tank at year end. These things gum way too quickly with modern fuels. I never did figure out what I missed cleaning the original carb
Did you find this story helpful?
Thank you for voting!

would not run.

Rich from KAILUA KONA, Hawaii

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Lawn mower sat for three years. drained fuel. replaced Inline filter, starter rope, fuel hose and carburetor. Put fresh gas in, and you would not believe it. Started first pull. I\'m a believer.
Did you find this story helpful?
Thank you for voting!

Recoil not working properly / Engine will not start without priming/then shuts off

Don from Island Park, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
1485349-S, 1416507-S
I looked at your you tube video on: How to Replace the Carburetor on a Honda HRX217 Lawn Mower. Although my engine is made by Kohler. The information I saw helped me to remove and replace the carburetor for my engine. Here is the video I watched.

https://www.youtube.com/watch?v=D32zXNYSxmw

I also replaced the r ecoil starter assembly. All that I needed to do was remove three nuts from the old starter and lift the old starter off, then the place the new starter in place and tighten the nuts.

Did you find this story helpful?
Thank you for voting!

Lawn mover does not start

Ingo from Mill Creek, Washington

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set, Wrench set
Parts Used:
1485349-S, 1408319-S
The lawn mover was for an unknown time outside. The car was completely oxidized and needs to be replaced. I also changed the oil and sharpen the blade.
Did you find this story helpful?
Thank you for voting!

Would start but would not continue to run

Link from Raleigh, North Carolina

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
1485349-S, 1408319-S
1. Watched some videos to help diagnose problem (fouled carburetor seemed most likely)
2. Replaced with carb kit rather than try to rebuild/clean existing carb
3. Fuel line disintegrated when removed. Also broke/cracked some linkages during removal, so there was a delay as I needed to order more parts. Also, a couple of s tripped screws had to be replaced
4. Completed general cleaning and PM, new plug and air filter
5. Started on the first pull.
Did you find this story helpful?
Thank you for voting!

Carburator

Michael from Washington C.H., Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Parts Used:
1485349-S
Replaced carburator
Did you find this story helpful?
Thank you for voting!
  • 1