Part Location Diagram of 1270701-S Kohler Module, Digital Spd Ad
See part J-9 in the diagram
( Grid squares measure 1x1 inch )

Module, Digital Spd Ad 1270701-S

Manufactured by:
Kohler
ERP Number:
ERP9886237
Part Number:
1270701-S
Original Equipment Manufacturer ?
  Works with your model  CV16-43522!
$254.47
Special Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   CV16-43522!

Troubleshooting

This part works with the following brands:
  • Kohler
This part works with the following products:
  • Engine
Part# 1270701-S replaces these:
12 707 01-S,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Engine would sometimes start, run for 15-20 mins, then shut down like out of fuel. Then would not start again

John from Statesville, North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
1270701-S
1. Pulled spark plug wire off spark plug.
2. Removed fuel tank (Two) 7/16 bolts. Set
fuel tank off side to access ignition
coil/module cover 5/16\" screws (3).
3. Loosen (3) 3/8\" bolts, front & side of
cover. Lift cover off, leaving ground wire
attached.
4. Replace now exposed
coil /module...reassemble..start.


Did you find this story helpful?
Thank you for voting!
  • 1