Part Location Diagram of M-631005-S Kohler Washer: Flat 6 Mm
See part E-16 in the diagram
( Grid squares measure 1x1 inch )

Washer: Flat 6 Mm M-631005-S

Manufactured by:
Kohler
ERP Number:
ERP9320077
Part Number:
M-631005-S
Original Equipment Manufacturer ?
  Works with your model  72046!
$5.95
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   72046!

Product Description

?

This is an OEM part sourced directly from the manufacturer. The washer is designed for use in Kohler engines. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a wrench or screwdriver when replacing this part. This item is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Kohler
  • Toro
  • Craftsman
  • Exmark
This part works with the following products:
  • Engine
  • Lawn Tractor
  • Lawn Mower
Part# M-631005-S replaces these:
M-631005-S,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Would only run max rpm with not resistance in the govern throttle control

Justin from Silverstreet , South Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Remove the throttle cable
Remove engine mount bolts
Disconnect the fuel line
Disconnect the wiring harness plug
Drain the oil
Remove the pulley shaft from the crank shaft
Pick the engine up and flip over with the oil pan facing up
Remove the oil pan from the engine
Remove the old govern gear
Locate and remove the govern pin usually laying in th engine block
Remove the flat washer from the govern shaft
Place the new washer on the govern shaft
Place the govern pin in the govern gear where the shaft comes thru the center
Place the assembly on the govern shaft until it snaps on
Clean the surface of the oil pan and engine block before applying rtv to the edges all the way around
Bolt the pan back on and mount the engine replacing all of the removed parts back to the engine.

Locate and remove
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9320077
Manufacturer Part Number: M-631005-S
Brand Model Number Description
Kohler 16101 Engine - Basic
Kohler 1925 Engine
Kohler 26501 Engine - Dixon
Kohler 26502 Engine - Snapper
Kohler 26503 Engine - Fhp
Kohler 26504 Engine - Fhp
Kohler 26505 Engine - Toro
Kohler 26506 Engine - Toro
Kohler 26507 Engine - Simplicity
Kohler 26508 Engine - Fhp
Kohler 26509 Engine - Fhp
Kohler 26510 Engine - John Deere
Kohler 26511 Engine - John Deere
Kohler 26512 Engine - Simplicity
Kohler 26513 Engine - John Deere
Kohler 26514 Engine - Mtd
Kohler 26515 Engine - Dixon
Kohler 26516 Engine - John Deere
Kohler 26517 Engine - Husqvarna
Kohler 26518 Engine - Toro
Kohler 26519 Engine - Shandong
Kohler 26520 Engine - Shivvers
Kohler 26521 Engine - John Deere
Kohler 26522 Engine - Simplicity
Kohler 27501 Engine - Fhp
Kohler 27502 Engine - Fhp
Kohler 27503 Engine - Toro
Kohler 27504 Engine - Mtd
Kohler 27505 Engine - Husqvarna
Kohler 27506 Engine - Husqvarna