Part Location Diagram of 11009-2062 Kawasaki Gasket
See part B-11009A in the diagram
( Grid squares measure 1x1 inch )

Gasket 11009-2062

Manufactured by:
Kawasaki
ERP Number:
ERP9878388
Part Number:
11009-2062
Original Equipment Manufacturer ?
  Works with your model  TD040D!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   TD040D!

Product Description

?

This is a genuine Kawasaki replacement part that is sourced from the original manufacturer to be used with two stroke engines. The special gasket is commonly used to seal the connection between the diaphragm and the body of the carburetor. It is recommended to replace gaskets when servicing the carburetor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Kawasaki
This part works with the following products:
  • Engine

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

My trimmer would start but would not accelerate because it would starve for gas.

Dan from Hastings, Nebraska

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
43028-2066, 11009-2062
Removed the carburetor cleaned it and replaced the diaphragm. Reassembled and made minor adjustments.Trimmer runs great.
Did you find this story helpful?
Thank you for voting!

My Kawasaki TF-22D wouldnGÇÖt start after 25 years of impeccable performance. Fuel began leaking from air filter assembly.

Roger from Garden Grove, California

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
43028-2066, 11009-2062
The rubber components lost their elasticity over the years. I replaced the pump diaphragm gasket & flexible pump diaphragm, which has the inlet/outlet check valves (spring-suction actuated flap type) incorporated into a single piece of material. (Note: Exercise care when removing the pump cover & diaphragm so the tiny springs donGÇÖt fall out and bounce into the Twilight Zone. Of course thatGÇÖs never happened to me!) Also replaced the needle valve, main diaphragm & gasket. Put it back together with just a few screws. Now runs like new. Thanks eReplacementParts!
Did you find this story helpful?
Thank you for voting!
  • 1