This is a manufacturer sourced replacement part used with Kawasaki engines. A spark plug is used to deliver electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap your spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench (or socket) to loosen the spark plug.
Remove air filter cover and replace air filter.
Emptied the oil and replaced the oil filter, then put new oil in.
Removed the old fuel filter and replaced it with a new one.
Removed the old spark plug and gapped the new one at 0.030 and installed it.
Removed the air filter case and the old air filter, replaced with the new one.
Remove the clamps from the fuel filter hoses and removed the old filter, and installed the new. one.
Drained the oil, removed the old oil filter and installed the new one, fill with new oil.
Removed the old spark plug, gapped the new one at 0.
... Read more030 and installed it.
Removed Enginge Shroud Using socket wrench
Cleaned out engine cooling fins with a clean paint brush
Removed old fuel filter using pliers On clamps after squeezing fuel supply line coming from tank
Replaced Fuel filter with new one and replaced 2 of the small fuel one clamps
Removed air filter tube and replaced wit
... Read moreh new one including new air filter clamps then replaced
Air filter and pre filter with new one
Removed spark plus wires using pliers and removed spark plugs with socket wrench and spark plug socket. Then installed new spark plugs with new ones and replaced spark plug wires.
I also vacuum operated fuel pump with new one and replaced a section of fuel line with new line from auto parts store
Drained the old engine oil into oil drain pan then removed and replaced engine oil filter. Refilled with new oil ( 2 quarts).
Removed and replaced oil filler neck and o-ring with new oil filler neck and o-ring.
Replaced engine shroud onto engine and replaced tractor hood.
The push rods for the left cyclinder were bent and the values were not operating properly. I ordered new push rods and installed them, now the tractor runs just like a new tractor.
Remove valve covers
Remove rocker arm adjusting nuts
Remove rocker arms and push rods
Remove rocker arm stud bolts
Remove push rod guide plates
Install new parts
Guide plates, stud bolts, push rods, adjusting nuts and set screws, and valve cover gaskets
Adjust valves
Tune up and oil change
Changed out plugs after adjusting gap
Drained oil and removed old filter
Replaced plug and new filter
Measured oil and poured into oil port.
Secured cap and started engine
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2008)_WW_11.gif "Part Location Diagram of BPR4ES Kawasaki Spark Plug")
(2008)_WW_11.gif "Part Location Diagram of BPR4ES Kawasaki Spark Plug")
