Part Location Diagram of BM6A Kawasaki Plug-spark-bm6a(ngk)-solid
See part F92070 in the diagram
( Grid squares measure 1x1 inch )

Plug-spark-bm6a(ngk)-solid BM6A

Manufactured by:
Kawasaki
ERP Number:
ERP9314513
Part Number:
BM6A
Original Equipment Manufacturer ?
  Works with your model  FA130R!
$11.06
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  Works with your model   FA130R!

Product Description

?

This is a genuine replacement part that has been sourced from the original manufacturer to be used with small engines. The spark plug connects to the cylinder assembly and is used to create an electric arc that ignites the fuel/air mixture inside the combustion chamber. The spark plug is sold as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Kawasaki
This part works with the following products:
  • Engine

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

pressure washer wouldn\'t start or run

Bradley from Eagan, Minnesota

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
BM6A, 11060-2035
I wanted to replace the carb but it\'s not available anymore. So I bought the gaskets from ereplacement and cleaned the carb jets myself, replaced the gaskets, reassembled, and it worked.Thank you for stocking the gaskets! I\'d have ended up replacing the motor.
A thin coat of gasket glue was very helpful on some of the surfaces dur ing installation.
Did you find this story helpful?
Thank you for voting!
  • 1