Part Location Diagram of 11060-7016 Kawasaki Muffler Gasket
See part D-11060 in the diagram
( Grid squares measure 1x1 inch )

Muffler Gasket 11060-7016

Manufactured by:
Kawasaki
ERP Number:
ERP8840445
Part Number:
11060-7016
Original Equipment Manufacturer ?
  Works with your model  FR691V-CS10!
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(7 rated repairs) ?
  Works with your model   FR691V-CS10!

Product Description

?

This is a genuine Kawasaki replacement part designed for use with lawn mowers/tractors. It is supplied directly from original equipment manufacturer. This gasket is used to provide a tight seal for the muffler. Over time it will crack allowing for leaks, requiring replacement. It is made out of composite material and it is sold individually. To replace this gasket you will need a wrench.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Kawasaki
  • Cub Cadet
  • Toro
  • Yard Man
  • MTD
  • Husqvarna
  • Lawn Boy
This part works with the following products:
  • Engine
  • Lawn Mower
  • Lawn Tractor

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(7 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Zero turn Gravely engine would cut off.

Donald from Naples, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Socket set, Wrench set
Used internet to locate engine wiring diagram. Corrected diagram to actual existing harness. Verified wiring continuity to carb fuel shutoff circuit. Replaced intermittently grounding wire harness. Performed maintenances required.

Did you find this story helpful?
Thank you for voting!

This Hustler Z machine was missing a lot of parts when I bought it., rocker arms, push rods, carb, etc. It had been cannibalized by some previous owner.

Pat from Wasilla, Alaska

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Began with a new battery and then a compression test. From there Identified more missing parts. Installed new parts and adjusted the valves. Many thanks to e-replacement for many of the parts. ItGÇÖs working great now.
Did you find this story helpful?
Thank you for voting!

replace muffler

Forrest from pHILLIPSBURG, Kansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
11060-7016
removed old muffler / mounded new muffler
Did you find this story helpful?
Thank you for voting!

Exhaust gasket leaking

joseph from Baker, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
Parts Used:
11060-7016
1 removed rear motor protector
2 removed muffler flange nuts
3 removed muffler
4 cleaned flanges
5 replaced muffler & tightened nuts
6 replaced motor protector
Did you find this story helpful?
Thank you for voting!

zero turn engine had been robbed of parts sitting for year when we purchased.

Toni from Poplarville, Mississippi

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Socket set
Have not installed parts yet, but everyone ordered will be installed. Previous owner let sit for a year without covering properly. Was missing push rods, rocker arms, etc. Will have running in a few weeks.
Did you find this story helpful?
Thank you for voting!

Nothing

Thomas from Stillwater , Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
11060-7016
Removed two bolts put the gasket on reinstall two bolts
Did you find this story helpful?
Thank you for voting!

Air leak at muffler and manifold.

Kevin from Placida, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Parts Used:
11060-7011, 11060-7016
Replace gaskets took my time. Repair went great gaskets were perfect.
Did you find this story helpful?
Thank you for voting!
  • 1