Remove air filter cover and replace air filter.
Emptied the oil and replaced the oil filter, then put new oil in.
Removed the old fuel filter and replaced it with a new one.
Removed the old spark plug and gapped the new one at 0.030 and installed it.
All of the parts I needed where in site.Your web site made it very easy to find my parts. Just remember to put a little oil on the top of the oil filter.
Removed Enginge Shroud Using socket wrench
Cleaned out engine cooling fins with a clean paint brush
Removed old fuel filter using pliers On clamps after squeezing fuel supply line coming from tank
Replaced Fuel filter with new one and replaced 2 of the small fuel one clamps
Removed air filter tube and replaced wit
... Read moreh new one including new air filter clamps then replaced
Air filter and pre filter with new one
Removed spark plus wires using pliers and removed spark plugs with socket wrench and spark plug socket. Then installed new spark plugs with new ones and replaced spark plug wires.
I also vacuum operated fuel pump with new one and replaced a section of fuel line with new line from auto parts store
Drained the old engine oil into oil drain pan then removed and replaced engine oil filter. Refilled with new oil ( 2 quarts).
Removed and replaced oil filler neck and o-ring with new oil filler neck and o-ring.
Replaced engine shroud onto engine and replaced tractor hood.
Used internet to locate engine wiring diagram. Corrected diagram to actual existing harness. Verified wiring continuity to carb fuel shutoff circuit. Replaced intermittently grounding wire harness. Performed maintenances required.
Remove the clamps from the fuel lines holding the filter
Remove the old filter and replace it with the new one, Replace the clamps
Drain the oil, remove the old oil filter and install the new one. Fill with new oil
Remove the air filter case, loosen the clamp, remove the old air filter and install the new one
Repla
... Read morece the clamp and the air filter case
1. After I gathered the oil pan, I drained the engine oil.
2. After a few minutes I took my tool and screwed off the old filter and prepared the new one for placement... Before screwing it in its place I coated the new filters gasket with oil.
3. Screwed the new filter into place and tightened both the filter and the drain pl
... Read moreug.
4. I then added the recommended oil level.
Completed.
Lawn Mower
- Cub Cadet Lawn Mower Model 13WI93AP010/2013 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
