All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
1- 2 hours
(3 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The engine set for approximately 10 years in the parts was just gummed up and wouldn\'t work replacing is the quickest and easiest way to take care of the problem
I removed the old carburetor and installed the new one which didn\'t take probably 30 minutes I\'ve been installed a start-stop switch this the stop-start switch is a real simple job to replace that\'s good yeah the head gasket replacement was about a 30-minute job the total job was about 2 hours
Remove pull start assembly (3-bolts) then remove engine shroud cover ( 5-bolts) using 1/4\" or 3/8\" socket set with 7/16 deep socket. Inside engine shroud cover the on/off switch is removed by bending the ground tang off the shroud and lifting out of switch mount hole. With a new switch inserted in mounting hole bend the switch ground ta
... Read moreng over the shroud to lock switch in place. Before reinstalling the shroud on engine do a continuity test. If switch has been properly installed, there should be continuity from switch wire to engine when switch is set to \"OFF\".
Read less
Did you find this story helpful?
Thank you for voting!
Restored my power trim edger
JIM from VERO BEACH, Florida
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Dismantled the entire edger, sandblasted all metal parts for primer and painting. replaced all Honda parts that were needed and available. Prepped and painted all engine parts that were removable. put it all back together everything looks and operates like new. primed and painted all power trim model 200 parts replaced all wheels with loc
... Read moreally purchased wheels. had fun, good project that kept me off the couch and out of the bar.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(VIN_G100-3000001-9999999)_WW_8.gif "Part Location Diagram of 36100-ZE1-015 Honda Switch Assembly-engine Stop")
(VIN_G100-3000001-9999999)_WW_8.gif "Part Location Diagram of 36100-ZE1-015 Honda Switch Assembly-engine Stop")
