Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair, perfect fit, worked perfect again
Replaced the ignition coil on my TROY Belt with a Honda GCV160 engine. Set the gap between the coil heads and the magneto(?) with a business card. Put everything back together. Started with one pull and ran perfectly. Took two weeks to get the part after the order was placed but I can't fault eReplacement with that.
Guest - July 30, 2020
Verified Purchase
★★★★★
★★★★★
Worked great. Service was great.
I have no complaints
Guest - September 1, 2020
Verified Purchase
★★★★★
★★★★★
The correct parts and easy repair.
Exactly what I ordered. Quality parts.
Guest - September 11, 2020
Verified Purchase
★★★★★
★★★★★
Great part
My part came in quickly and now lawnmower is back running. Will order from ereplacement again
David - September 22, 2020
Verified Purchase
★★★★★
★★★★★
Great part shipped fast
Great part shipped fast
Guest - October 22, 2021
Verified Purchase
★★★★★
★★★★★
Part was exactly what I needed.
Had to remove more than expected to get coil off. Replacement part same exactly as original,installed, motor fired right up.
Guest - July 7, 2022
Verified Purchase
★★★★★
★★★★★
work good
real good fit
Guest - May 20, 2023
Verified Purchase
★★★★★
★★★★★
ignition coil
installed it and it started up first pull
Kirk - May 22, 2023
Verified Purchase
★★★★★
★★★★★
Same replacement part
Part was packaged nicely. Quick install and my mower runs like new. No more miss firings. Honda mower is roughly 17 years old. I will use erelacementparts again!!!
Guest - September 10, 2019
Verified Purchase
★★★★★
★★★★★
OEM quality part, good overall experience.
direct replacement for the old coil. Product was as described. Parts arrived in a timely manner. I will be using ereplacementparts again.
Guest - October 14, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(12 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Engine started fine, but it sputtered and died when it got hot. I checked the carburetor, spark plug, and air filter. They were all good. The coil had broken down. When it was replaced the machine
Take off the rope starter. ( 3 nuts). Pull back the cover/gas tank to expose the flywheel. Disconnect the spark plug wire and the ground/ kill switch wire. Remove the coil\'s two mounting bolts and the coil. Put the new coil in place making sure it is in contact with the flywheel. Gap the distance between the coil and the flywheel magn
... Read moreets about the thickness of a business card. Reassemble the machine.
First I removed the air cleaner cover and removed the the old air cleaner and installed the new one. I then removed the coil assembly from the unit and installed the new on, and gapped distance between the coil and the magnets on the flywheel at 0.024 I then replace the spark plug and gapped the new one at 0.030 and installed it in the en
... Read moregine. Engine runs very well now.
Removed the top cover and gas tank, carefully placed them so draining the gas was not needed.
Disconnected the spark plug wire
Disconnected the spark cutoff wire
Removed the two bolts that held the coil assembly
Install the new coil assembly using two thin cardboard spacers to set the gap to the flywheel
Tigh
... Read moreten the bolts
Connect the wires
Replace the gas tank and cover assembly
I removed the old coil, and set it .010 from the magnets on the flywheel. After that I removed the three screws from the broken starter, then replace the new starter
Removed the cover and fuel tank(Empty)
Removed the coil and spark plug wire
Bolted the new coil on the engine and gapped it at 0.010
Place the wire on the spark plug
Replace the fuel tank and the cover
1. Removed starter rope assembly by removing 3 nuts.
2. Disconnected the spark plug wire.
3. Disconnected the ignition coil ground wire.
4. Removed two bolts on the ignition coil.
5. Removed the ignition coil.
6. Loosely installed new ignition coil by bolting it down without tightening to much.
7. Utili
... Read morezed several sheets of paper to build up to the appropriate gap (compare thickness to feeler gauge) and pressed them tightly between ignition coil and flywheel and tighten the two bolts down.
8. Reconnect everything and work backwards to assemble.
Removed top of engine. Removed old part. Installed new part with business card as spacer between magneto and ignition coil. Replace top part of engine. Started on first pull.
Removed plastic housing (3 10mm nuts).
Removed plug wire and kill wire.
Removed two 10 mm bolts holding coil.
Installed new coil with 0.30 mm gap between each pole and the flywheel.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9937339
Manufacturer Part Number: 30500-ZL8-014
Lawn Mower
- Honda Lawn Mower Model GC135WKT2 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2009)_WW_11.gif "Part Location Diagram of 30500-ZL8-014 Honda Ignition Coil Assembly")
(2009)_WW_11.gif "Part Location Diagram of 30500-ZL8-014 Honda Ignition Coil Assembly")
