Part Location Diagram of 19650-ZL8-000 Honda Guide- Air
See part C-15 in the diagram
( Grid squares measure 1x1 inch )

Guide- Air 19650-ZL8-000

Manufactured by:
Honda
ERP Number:
ERP9916503
Part Number:
19650-ZL8-000
Original Equipment Manufacturer ?
  Works with your model  GC190A!
$15.49
Special Order

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   GC190A!

Product Description

?

The air guide attaches to the carburetor insulator and is made of metal. This item is available as an individual replacement part. This is an original Honda part for use in engines and generators. It might require a screwdriver, a set of pliers, and a socket set to replace this part if it becomes broken.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Honda
  • Briggs and Stratton
This part works with the following products:
  • Engine
  • Snow Blower
  • Generator

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Honda GC160 carb too gummed up.

Lee from Lake Lure, North Carolina

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
CHEAPER and FASTER to replace carburetor assembly and gaskets than to disassemble and clean/replace parts. Had already determined carb problem(s). Started 2nd pull after reassembly and after warmed up adjusted idle speed. Now my pressure washer is ready when I need it.
Did you find this story helpful?
Thank you for voting!

Engine would not start

james from lexington, Michigan

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set
Installed the new fuel pump and the carb. Started on the second pull. Make sure gaskets and spacers are installed correctly.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9916503
Manufacturer Part Number: 19650-ZL8-000
Brand Model Number Description
Briggs and Stratton 01054-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-0 (010540, 01054 0) Parts
Briggs and Stratton 01054-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-2 (010542, 01054 2) Parts
Briggs and Stratton 01054-3 Pressure Washer - Briggs & Stratton Pressure Washer Model 01054-3 (010543, 01054 3) Parts
Briggs and Stratton 01170-0 Generator - Briggs & Stratton Generator Model 01170-0 (011700, 01170 0) Parts
Honda EN2000 Generator - Generator
Honda EN2500 Generator - Generator
Honda FG400 Tiller - Tiller
Honda FG500 Tiller - Tiller
Honda G160LE Engine - Honda G160le-Type-Vxa Parts
Honda GC160 Engine - Small Engine
Honda GC160A Engine - Small Engine
Honda GC160LA Engine - Small Engine
Honda GC160LE Engine - Small Engine
Honda GC190A Engine - Small Engine
Honda GC190LA Engine - Small Engine
Honda GS190A Engine - Small Engine
Honda HS520 Snow Blower - Snowblower
Honda HS520K1 Snow Blower - Snowblower
Honda HS720 Snow Blower - Snow Blower
Honda WN20 Water Pump - Water Pump
Honda WN30 Water Pump - Water Pump