Part Location Diagram of 18381-ZL8-305 Honda Gasket- Muffler
See part N-7 in the diagram
( Grid squares measure 1x1 inch )

Gasket- Muffler 18381-ZL8-305

Manufactured by:
Honda
ERP Number:
ERP9911230
Part Number:
18381-ZL8-305
Original Equipment Manufacturer ?
  Works with your model  GC190AVBA!
$7.20
On Order
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(7 rated repairs) ?
  Works with your model   GC190AVBA!

Product Description

?

It is a genuine gasket that is supplied directly from the original manufacturer for use with Honda engines commonly installed on lawn and garden equipment. This replacement gasket is used to create an air-tight seal for the muffler assembly, for correct location and uses make sure to check appropriate diagrams of your equipment. Over time the material may get compressed and crack eventually requiring replacement to maintain the proper seal. Please note this high quality composite material gasket is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Honda
  • Briggs and Stratton
  • Toro
  • MTD
  • Cub Cadet
  • Jonsered
  • Craftsman
This part works with the following products:
  • Engine
  • Lawn Mower
  • Pressure Washer
  • Generator

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(7 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Muffler was shot, falling off.

robert from santa cruz, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Took off the old muffler, and replaced it with new gasket and muffler.
Did you find this story helpful?
Thank you for voting!

Muffler bolts broke off in cylinder head during removal of old muffler.

Gary from Vineland, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set
Tried to drill and easy-out old bolts unsuccessfully, had to drill out old muffler bolts completely. tapped boltholes out to M10X1.5 and inserted treaded bushing M6-1.0 X M10-1.5. cleaned up flange with emory wheel and installed new gasket, muffler, spark arrestor and plate, bolts, and muffler guard. Sounds and runs like a new mower. Not bat for a mower that\'s approx. 10 years old! Don\'t put em on the curb if the still run good folks! this route was much cheaper than a new mower!
Did you find this story helpful?
Thank you for voting!

muffler was shot

Larry from NAMPA, Idaho

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Just used a screwdriver and it took me under 10 minutes to replace the old muffler
Did you find this story helpful?
Thank you for voting!

Go cart racing engine was leaking fuel

Mark from Myrtle Beach, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set, Wrench set
Replace gaskets bolts Running great
Did you find this story helpful?
Thank you for voting!

Mower needed new muffler

Robert from Jericho, Vermont

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Removed old muffler and installed new one. Also installed the muffler gasket which was not on the old muffler. Gasket sealed the joint better and resulted in quieter operation.
Did you find this story helpful?
Thank you for voting!

muffler was loud

Thomas from ALBANY, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set
Parts Used:
18381-ZL8-305
Replaced muffler and gasket using information found on youtube.. I used plenty of penetrating oil (Blaster) so as not to break the bolts holding the old muffler on... It made the job a lot easier.
Did you find this story helpful?
Thank you for voting!

Muffler rusted and became loose.

JAMES from Toledo, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Removed the old muffler and shield.
Replaced with new parts. Very easy.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9911230
Manufacturer Part Number: 18381-ZL8-305
Brand Model Number Description
Briggs and Stratton 01170-0 Generator - Briggs & Stratton Generator Model 01170-0 (011700, 01170 0) Parts
Briggs and Stratton 01431-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-0 (014310, 01431 0) Parts
Briggs and Stratton 01431-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-1 (014311, 01431 1) Parts
Briggs and Stratton 01431-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-2 (014312, 01431 2) Parts
Briggs and Stratton 01431-3 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-3 (014313, 01431 3) Parts
Briggs and Stratton 01431-4 Pressure Washer - Briggs & Stratton Pressure Washer Model 01431-4 (014314, 01431 4) Parts
Briggs and Stratton 01434-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-0 (014340, 01434 0) Parts
Briggs and Stratton 01434-1 Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-1 (014341, 01434 1) Parts
Briggs and Stratton 01434-2 Pressure Washer - Briggs & Stratton Pressure Washer Model 01434-2 (014342, 01434 2) Parts
Briggs and Stratton 01435-0 Pressure Washer - Briggs & Stratton Pressure Washer Model 01435-0 (014350, 01435 0) Parts
MTD 12A-989Q Lawn Mower - MTD Lawn Mower Model 12A-989Q (12A989Q, 12A 989Q) Parts
MTD 12A-989Q710 Lawn Mower - MTD Lawn Mower Model 12A-989Q710 (12A989Q710, 12A 989Q710) Parts
MTD 12A-98FQ Lawn Mower - MTD Lawn Mower Model 12A-98FQ (12A98FQ, 12A 98FQ) Parts
MTD 12A-98FQ710 Lawn Mower - MTD Lawn Mower Model 12A-98FQ710 (12A98FQ710, 12A 98FQ710) Parts
Toro 20192 Lawn Mower - Lawn Mower
Toro 20194 Lawn Mower - Lawn Mower
Toro 22155 Lawn Mower - Toro Lawn Mower Model 22155/SERIAL: 313000001-313999999 (22155/SERIAL:313000001313999999, 22155/SERIAL: 313000001 313999999) Parts
Toro 22156 Lawn Mower - Toro Lawn Mower Model 22156/SERIAL: 313000001-313999999 (22156/SERIAL:313000001313999999, 22156/SERIAL: 313000001 313999999) Parts
Craftsman 944364152 Lawn Mower - Gas Walk-Behind Mower
Jonsered 967957301-00 Lawn Mower - Gas Walk-Behind Mower
Cub Cadet CC98H Lawn Mower - Cub Cadet Lawn Mower Model CC98H/2010 Parts
Honda EN2000 Generator - Generator
Honda EN2500 Generator - Generator
Honda FG400 Tiller - Tiller
Honda FG500 Tiller - Tiller
Honda GC135 Engine - Small Engine
Honda GC135PHA Lawn Mower - Honda Lawn Mower Model GC135PHA Parts
Honda GC135PXA Lawn Mower - Honda Lawn Mower Model GC135PXA Parts
Honda GC135QHA Lawn Mower - Honda Lawn Mower Model GC135QHA Parts
Honda GC135QHA1 Lawn Mower - Honda Lawn Mower Model GC135QHA1 Parts