Part Location Diagram of 16882-ZL8-000 Honda Tube- Diaphragm
See part J-3 in the diagram
( Grid squares measure 1x1 inch )

Tube- Diaphragm 16882-ZL8-000

Manufactured by:
Honda
ERP Number:
ERP9901247
Part Number:
16882-ZL8-000
Original Equipment Manufacturer ?
$5.95
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine OEM approved part designed for use with Honda engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or faulty tube that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Troubleshooting

This part works with the following brands:
  • Honda
  • Briggs and Stratton
This part works with the following products:
  • Engine
  • Generator

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The air cleaner cover was broke and missing, letting rain water into the engine

Moriah from Washington, , Illinois

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1. Removed fuel tank
2. Removed old air cleaner assembly and carburetor
3. Replaced carb, gaskets, and air cleaner assembly
note- if you replace the carb you will need to get x2 on some of the gaskets
4. Put fuel tank back on.
The motor runs good now, parts fit well, the only tricky part is keeping everything lined up when putting it back together. I drained the oil out of the engine and set it on its side with the carb up so I could \'\'stack\'\' the parts up as i put them on. Thanks for the prompt shipping!
Did you find this story helpful?
Thank you for voting!

Run for a short time then stop

Johnny from LOUISVILLE, Tennessee

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Replaced parts to keep fuel flowing, the old ones had cracks to let in outside air.
Did you find this story helpful?
Thank you for voting!

Hard fuel lines

Robert from Leominster, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Wrench set
Bought the machine used found bad fuel lines so I changed the fuel lines filter and pump
Did you find this story helpful?
Thank you for voting!

Honda Engine fuel pump was not working

Bruce from LA PLACE, Louisiana

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
16882-ZL8-000
The fuel pump works off of the vacuum/pressure of the motor. Original tubing had dry rotted and was leaking. Changed out the tubing and running good again
Did you find this story helpful?
Thank you for voting!

Broken gas tank bracket

Robert from Pine Grove, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
removed carburetor and installed new bracket, replaced diaphragm tube
Did you find this story helpful?
Thank you for voting!

WouldnGÇÖt run smooth

charles from utica, Mississippi

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Removed carburetor and replaced parts then reinstalled carburetor.
Did you find this story helpful?
Thank you for voting!
  • 1