This is an authentic manufacturer sourced replacement part designed for use with Honda engines. This carburetor gasket provides an air tight seal between the carburetor and the insulator. Over time gaskets tend to deteriorate and would need to be replaced. It is made out of compound material and it is sold individually. You would need a screwdriver to replace this item.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Devil's in the details
The big pieces are the easy parts (pun intended.) MOST big pieces, though, require other little pieces. eReplacments makes it easy to NOT miss those!
The carburetor itself was simple to order and, along with this gasket, arrived quickly. In only a few minutes after the package arrived my Honda GX engine was back to proper operation.
Guest - October 30, 2019
Verified Purchase
★★★★★
★★★★★
Parts fit perfectly great job
I have ordered parts several times, parts always came quick never a problem and great customer service I will continue to order parts from ereplacement
Guest - March 14, 2020
Verified Purchase
★★★★★
★★★★★
As advertised
OEM part at a great price, super fast delivery, no hassle help in finding correct part for my vintage Honda generator
Guest - July 2, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit factory part.
Worked perfect. Genuine Honda parts
Andy - December 29, 2020
Verified Purchase
★★★★★
★★★★★
Great service
Called and always answered and help find the right parts and shipping was fast. Great employees. Friendly and knowledgeable. They’re my go to company use them all the time. Thanks hard to get good service now days but awesome here. Brian California
Guest - April 14, 2021
Verified Purchase
★★★★★
★★★★★
Ordered 2 carb gaskets
One paper gasket had shrunk with age and didn't fit well.. Also shipping and handling cost more than 2 little paper gaskets. The shipping time for these small things took way too long for the price of the items.
Guest - October 30, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Remove broken spark plug boot by pulling up.
2. Screw new boot on spark plug wire.
3. Place boot on spark plug.
4. Remove air filter.
5. Remove fuel line from carb using needle nose pliers.
6. Remove front two nuts from plastic cover.
7. Remove bolt on rear of plastic cover.
8. Remove cover.
... Read morer />9. Remove carb.
10. Replace carb and gaskets in reverse order.
Unbolt old carb, remove linkage and fuel line , then reverse procedure.
Total time 15 minutes!
Parts arrived quickly via priority mail!!
Definitely recommend !
Removed carb. Removed jets. Cleaned and re-assembled with new gaskets. Reinstalled with new gaskets.
You might need a set of orifice pins to clean the small holes in the jest and emulsifier tube. These are tool steel pins with highly accurate diameters that you match to the orifice holes. Small diameter wires or sewing ne
... Read moreedles can also be used.
Read less
Did you find this story helpful?
Thank you for voting!
I had purchased a new carburetor but discovered the gaskets were too bad to reuse.
1. Had to remove the pump from the frame. Carburetor could not be removed from motor without hitting the frame.
2. Carburetor was removed and taken apart. throttle was sticking in the open position due to gas deposit build up on the shaft.
3. Soaked the carburetor in cleaner for thirty minutes and put back together, re-inst
... Read morealled on motor.
4. Motor started up fine and idle like it should.
The new blend of gas is really hard on small engine because of deposit from the gasoline. In my case the large pump is only used once or twice a year and just set in the shop on a shelf. It \'s eight year old and looks new. Honda makes a very good motor, not a design problem, it a !!GAS!! problem.
Read less
Did you find this story helpful?
Thank you for voting!
Bad fuel for a few years and lack of maintenance
chris from LOS ANGELES, California
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
After numerous attempts to locate leak, determined it was due to worn gasket on fuel bowl. Also replaced worn gasket on manifold although unrelated to leak. This would not have been possible without the ereplacement.com website. The parts diagrams are excellent in determining parts needed. OUTSTANDING!!!! This is my go-to site for parts a
... Read morend relavent information. Thanks
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/engine/seals-and-gaskets/"},{"position":2,"name":"16221-ZH8-801","title":"16221-ZH8-801","url":""}]
_WW_4.gif "Part Location Diagram of 16221-ZH8-801 Honda Carburetor Gasket")
_WW_4.gif "Part Location Diagram of 16221-ZH8-801 Honda Carburetor Gasket")
