Part Location Diagram of 16221-ZE3-800 Honda Gasket- Carburetor
See part C-14 in the diagram
( Grid squares measure 1x1 inch )

Gasket- Carburetor 16221-ZE3-800

Manufactured by:
Honda
ERP Number:
ERP9899112
Part Number:
16221-ZE3-800
Original Equipment Manufacturer ?
$2.99
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This replacement carburetor gasket is a high quality item that is sourced directly from original equipment manufacturer for use with Honda engines. This gasket is used to provide and air tight seal between the carburetor and the insulator. Please note this part is made from durable compound material and it is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Engine
  • Generator
  • Lawn Tractor
  • Snow Blower
  • Lawn Mower
  • Water Pump
  • Tiller
  • Miscellaneous
Part# 16221-ZE3-800 replaces these:
  • 16221-ZE3-306

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

leaking carb.

Jon from Northfield, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
decades old carb off neglected Honda generator leaking gas, with prior repair attempts by previous owner. E parts had the only nice pic that was clearly identical to existing carb. Sometimes you just decide to bite the bullet & spend $100 to get a fresh start. It worked! JB
Did you find this story helpful?
Thank you for voting!

My Honda HS 1132 Snow Blower Carburetor was leaking fuel.

Douglas from HAYDEN, Idaho

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Although I own the Honda repair manual, it was of little help. I tried to find a video for this model on the internet, but could not find one for my HS 1132
Rather than try to figure out what was leaking, I just bought another carb and choke ass. It is not that expensive, compared to almost $4K for a new blower.
I carefully to ok photos with my cell phone at each step.
You must remove the shroud to get at the carb. After that, it was sort-of obvious what to do.
The choke cable is attached to the choke assembly with a circle clip that was a bear to remove and replace.
Take careful note of the several springs that must be removed and put back.
After assembly, the motor started on the first pull. No adjustments were required.

Did you find this story helpful?
Thank you for voting!

Fuel transferred to oil tank found fuel tank empty

SAMUEL from PEARLAND, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Removed carburator, cleaned float needle, removed fuel mixed with oil from oil tank, Cleaned spark plug, put everything back together pull the rope and now is running like a champ.
Did you find this story helpful?
Thank you for voting!

Carburetor gasket was leaking thru

Rolando from Houston, Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Remove carburetor and than remove old gasket replace it with new gasket and but carburetor back and it worked.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9899112
Manufacturer Part Number: 16221-ZE3-800
Brand Model Number Description
Honda E1500K4 Generator - Generator
Honda E2500K4 Generator - Generator
Honda E3500K1 Generator - Generator
Honda E3500K2 Generator - Generator
Honda E4500 Generator - Generator
Honda E4500K1 Generator - Generator
Honda EB12D Generator - Generator
Honda EB2200X Generator - Generator
Honda EB2500XK1 Generator - Generator
Honda EB3000 Generator - Generator
Honda EB3500X Generator - Generator
Honda EB3500XK1 Generator - Generator
Honda EB3800X Generator - Generator
Honda EB4000 Generator - Generator
Honda EB5000I Generator - Generator
Honda EB5000IA Generator - Honda Generator Model EB5000IA Parts
Honda EB5000X Generator - Generator
Honda EB5000XA Generator - Honda Generator Model EB5000XA Parts
Honda EB5000XK1 Generator - Generator
Honda EB5000XK1AGA Generator - Honda Generator Model EB5000XK1AGA Parts
Honda EB5000XK2 Generator - Generator
Honda EB5000XK2A Generator - Honda Generator Model EB5000XK2A Parts
Honda EB5000XK2AC Generator - Honda Generator Model EB5000XK2AC Parts
Honda EB5000XK2ACH Generator - Honda Generator Model EB5000XK2ACH Parts
Honda EB5000XK2AH Generator - Honda Generator Model EB5000XK2AH Parts
Honda EB5000XK2AN Generator - Honda Generator Model EB5000XK2AN Parts
Honda EB5000XK2ANH Generator - Honda Generator Model EB5000XK2ANH Parts
Honda EB6500X Generator - Generator
Honda EB7000I Generator - Generator
Honda EG1000 Generator - Generator