Part Location Diagram of 16100-ZE3-814 Honda Carburetor Assembly - Be30b E
See part C-8 in the diagram
( Grid squares measure 1x1 inch )

Carburetor Assembly - Be30b E 16100-ZE3-814

Manufactured by:
Honda
ERP Number:
ERP9898199
Part Number:
16100-ZE3-814
Original Equipment Manufacturer ?
$170.15
In Stock
Delivers in 3-5 Business Days!

Easy 

1- 2 hours 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This genuine replacement part is specially designed for use with Honda engines commonly installed on lawn and garden equipment. It is sourced from the original equipment manufacturer and it is sold individually. The purpose of the carburetor is to mix gas and air before the combustible mix goes into the engine. If the engine won\\\'t start and the tank is full of fresh fuel or it starts and then quickly dies, the carburetor is likely the problem. It is advised to replaced the gaskets when installing the new carburetor assembly to ensure proper seal.

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Engine
  • Generator
Part# 16100-ZE3-814 replaces these:
16100-ZE3-812,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

1- 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The engine set for approximately 10 years in the parts was just gummed up and wouldn\'t work replacing is the quickest and easiest way to take care of the problem

Donald from Evansville, Indiana

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
I removed the old carburetor and installed the new one which didn\'t take probably 30 minutes I\'ve been installed a start-stop switch this the stop-start switch is a real simple job to replace that\'s good yeah the head gasket replacement was about a 30-minute job the total job was about 2 hours
Did you find this story helpful?
Thank you for voting!

leaking carb.

Jon from Northfield, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set
decades old carb off neglected Honda generator leaking gas, with prior repair attempts by previous owner. E parts had the only nice pic that was clearly identical to existing carb. Sometimes you just decide to bite the bullet & spend $100 to get a fresh start. It worked! JB
Did you find this story helpful?
Thank you for voting!
  • 1