This replacement recoil starter assembly is commonly used with small Honda engines. This is the starter assembly that is used to pull start the unit. It is a complete assembly that includes a plastic shroud/housing, starter pulley, starter spring, grip and the pull rope. Please note the hardware/screws to attach this assembly are sold separately. Replacing this starter assembly is a simple task that should only require a screwdriver. • Make sure to disconnect the spark plug • Remove housing screws • Separate the old housing from the unit • Secure the new housing with the screws • Reattach spark plug and test the equipment
Troubleshooting
This part works with the following brands:
Honda
Briggs and Stratton
MTD
Cub Cadet
This part works with the following products:
Engine
Lawn Mower
Generator
Part# 28400-ZL8-033ZA replaces these:
28400-ZL8-023ZA,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy to install, exactly as we needed
Has our Honda pressure washer working great and MUCH easier to get started!
Guest - July 23, 2019
Verified Purchase
★★★★★
★★★★★
Exact OEM replacement
Perfect all around, we're back in action
Guest - July 25, 2019
Verified Purchase
★★★★★
★★★★★
Just what I needed. Fast shipping.
Part fit perfectly.
Guest - August 12, 2019
Verified Purchase
★★★★★
★★★★★
Easy repairs, and all parts were sent correctly!!
All the parts fit perfectly and parts were shipped correctly!! Thanks for the parts being delivered on a rush!! All worked out greatly!!
Ray udovich
Guest - October 5, 2019
Verified Purchase
★★★★★
★★★★★
The replacement part fit
The replacement part fit perfectly and worked with the Honda engine on the first start. Fair price, quick turnaround and the part worked. Perfect!!!
Guest - March 23, 2020
Verified Purchase
★★★★★
★★★★★
Perfect just what we needed
Was easy to replace for a wood splitter
Arrived quick
Guest - November 4, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the old coil, and set it .010 from the magnets on the flywheel. After that I removed the three screws from the broken starter, then replace the new starter
Someone broke the original bolt stud that held the recoil starter assembly on, when they tried to remove it.
I removed the 2 remaining nuts from the 2 intact bolt studs, which allowed for the removal of the recoil starter assembly.
I used an adjustable wrench to remove the broken bolt stud and used the same wrench to install t
... Read morehe new one.
This allowed me to properly install the new recoil starter assembly.
I simple installed the replacement part that came with the starter rope attached. Literally took 10 minutes. I Received the party in 3 days as promised And am thrilled with how easy it was.
Did you find this story helpful?
Thank you for voting!
1.Complete starter assembly was shattered. 2. Fuel shutoff was difficult to operate.
These items were used for a very old, 22 ton log splitter. eReplacementParts provided an easy, secure way to get the right parts the first time. Make sure you can provide all the numbers on the side of the engine.
Items purchased are plug and play. 3 bolts to remove the starter assembly (Make sure you clean debris from the
... Read more flywheel.). Petcock involves one #2 Philips head screwdriver and small needle head pliers for the spring, fuel hose clamps (Make sure you clamp the rubber fuel supply line with vice grips or empty the fuel tank first.).
I purchased the whole starter assembly. I only had to remove the screws from the original and replace with the new unit. Perfect fit and works like new.
Using socket set, removed three nuts. Pulled off old assembly and replaced with new unit. Replaced and tightened old screws. At the same time I replaced the spark plug and air filter. It was a good time to change the oil. Very easy task. All done in under 15 minutes.
Engine
- Honda Small Engine Model GC160ADHAF Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(VIN_GCAHA-1000001-3599749)_WW_15.gif "Part Location Diagram of 28400-ZL8-033ZA Honda Recoil Starter Assembly")
(VIN_GCAHA-1000001-3599749)_WW_15.gif "Part Location Diagram of 28400-ZL8-033ZA Honda Recoil Starter Assembly")
